The Kafer style bars are finally ready for you to order.
Kits can be purchased as a 3 bar or 5 bar, with all parts needed for installation supplied.
Price: $295 for the 3 bar Kit, $395 for the 5 bar kit.
Postage additional.
3 Bar kit includes:
1. 2 x Longer High Tensile shock bolts
2. 2 x Custom brackets (mounted to the upper shock point, same for 3 and 5 bar kit)
3. 6 x Custom made Clevis joints (3 RH and 3 LH threaded)
4. 1 x Long Aluminium cross bar
5. 2 x Short Aluminium support bars
6. 2 X Weld on brackets
*All components are plated and anodised
*All bolts,lock and flat washes, LH and RH nuts are supplied
5 Bar Kit includes ALL OF THE ABOVE plus
1. 2 x Short Aluminium support bars (4 in total for the kit)
2. 4 x Custom made Clevis joints (10 in total for the kit)
3. 2 x Weld on brackets (4 in total for the kit)
NOW IN STOCK AND READY FOR DELIVERY.
Postcode: 2142
Please post on here if you wish to order or just send me a PM.
NOW WITH **NEW KIT** PICTURED
Cheers
Craig T
very nice craig what does the kit weigh?
| Quote: |
Sorry for the ignorance but do these things work on all Type 1's ie swing axle & IRS the same ???
Am very interested, even though Herb generally only can spin the wheels on wet grass.
Peter
Peter, yes it will work on swing as well as IRS........................you would be suprised at how much the forks flex even in a standard beetle,
this will stop it. 
for everyone that has ordered, Thankyou. Will have them delivered within 2-3 weeks.
Still taking orders
I have asked before, but do you fellas know of any first hand experience of these things in an Offroad veicle either a Baja or Buggy...
Im thinking they could be helpful in the soft stuff like sand ect, but would they hold up. Though knowing me ill never get a chance to get off
road.
Oh by the way they look great!!
This kit will help with stopping the gearbox forks from flexing, this will most certainly occur in offroading.
And yes they will "hold up" with no problems
I will be fitting this kit to my buggy.
#! Message No Longer Available !#
yes also interested in this answer. People running ej20's are moving the cradel forward 100mm how would this work on a subi bug with 091 box with
these requirments?
Cheers Stephen
Hi Craig
Just wondering whether you had a chance to figure out a setup that would fit into a 54 oval?
The five bar is my preference.
cheers
Marcus
| Quote: |
My foolish son put something stupid up here before ... I love my children 
I'll be interested down the track when my new project is off and running. Good price.
photo of the new Kits........
mounted onto my "spare" irs pan !
bump
Well I ordered my Kafer Bar the other day and it took 24 hrs to arrive, so much for customer service, I waited by the front gate for like .. a long
time .
Loosk just like the pic and if I had a car to put it on then I would take some pics
hehe, sorry brad I was hoping for a 23hr turnaround!
| Quote: |
oval?
oval .. damn typo's I meant Split
Isn't that one of those rare turbo EG's too
bump
Hi Craig
Will these fit with stock heater boxes in place?
Steve
Craig,
PM sent mate.
Cheers.
Well I found a few spare minutes today to fit up one of Craig's 5 bar setups. This is in a 75 L Bug.
Went in without a hassle, everything fitted fine and the only thing I did differently was welded the rear tab to the cross member rather than the
frame horn.
As luck would have it the supplied tabs fitted this application perfectly.
Out of 10 I would have to give it 10 at this stage. It was shipped fast, packed well and supplied as specified. Fitted perfectly and the quality is
very good. Even with it just tacked in place it stiffens up the rear end.
Hi Brad
Looks good. Why did you keep the stock L bug mounts? They are crap, its an easy conversion to fit an earlier mount frame.
Steve
| Quote: |
Well at least it didn't fall out when I lifted it on the hoist....