| [ Total Views: 1904 | Total Replies: 1 | Thread Id: 17085 ] |
|
|
 72TWINCAB
Fahrvergnugen
Posts: 978
Threads: 42
Registered: February 25th, 2003
Member Is Offline
Location: Redcliffe Qld
Theme: UltimaBB Pro Blue ( Default )
Mood: YOOTTED
|
| posted on December 28th, 2003 at 04:55 PM |
|
|
Points gap on 009 Distributor
I have a 2 litre Kombi with 009 distrubutor. I have just brought some points but am not sure on the gap I need to set it to.
Please help.
|
|
|
Andy
Son of Jim - Creator of Good
Andy's Adventures
Posts: 2812
Threads: 181
Registered: November 5th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man
|
| posted on December 28th, 2003 at 07:31 PM |
|
|
Not sure if it's the same for a 009, but SVDA dizzy on 1600TP and all type 4 kombi's is 0.4mm
Also good to check dwell if possible (44-50deg).
Is the motor otherwise stock, and does the 009 run OK?? For an otherwise stock setup a stock Dizzy is best.
Andy
:thumb
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on December 28th, 2003 at 07:37 PM |
|
|
Set the gap to 0.016" on number one position same as a standard set up.
The timming may vary depending on whats been done to the engine etc etc
You may have to try a few positions to make sure it does not ping
|
|
|
Robo
Compulsive Aussie Vee Dubber
Posts: 4491
Threads: 120
Registered: February 13th, 2003
Member Is Offline
Location: Tweed Heads
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval madness
|
| posted on December 28th, 2003 at 08:06 PM |
|
|
On my stock 2ltr dizzy it's .016.
Rob....
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
 |
|
|
