Board Logo
Go To Bottom

Forum Rules
New guidelines are in place as of 15/1/2014. Please review here:

http://forums.aussieveedubbers.com/viewtopic.php?tid=104733 

Printable Version  
[ Total Views: 2409 | Total Replies: 7 | Thread Id: 84553 ]
Author: Subject:  Brand new 1916cc engine
MemberRodPenrose
A.k.a.: Rodney Penrose
Insano Dub Head
****


Avatar


Posts: 792
Threads: 330
Registered: April 21st, 2005
Member Is Offline

Location: Kembla Grange, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: GETTING FASTER

posted on June 29th, 2010 at 08:06 PM
Brand new 1916cc engine


I have just finished another engine this week and it is ready to be picked up or shipped out . This engine has been assembled with all brand new components with the exception of the rocker arms and has the following components ;
AS 41 magnesiun case machined for 94mm
CB performance 69mm cro-moly counterweighted 8 dowelled crank
AA performance 5.4" cro-moly I beam conrods
KS main bearings
KS conrod bearings
Mahle dual thrust cam bearings
Scat C 20 camshaft with billet aluminium gear
AA performance 94mm piston/barrel kit
Ported 043 Mexican heads with 40 x 35.5mm stainless valves
Scat 8mm cro-moly headstud kit
Scat case install kit
Scat crank install kit
Dizzy drive /shims and spring
Brosol 26mm HD oil pump
Empi oil pump cover
New case nut and bolt kit
Bosch oil pressure switch
AA performance 36mm cro-moly gland nut and washer
AA performance 12 volt lightened cro-moly 8 dowelled flywheel
Scat solid shimmed rocker kit
Scat swivel feet adjusters
Std aluminium pushrods
Std used vw rocker arms
Steel cam plug
Scat bearind dowells
Gasket kit
Elring rear main seal
AA performance flywheel shims
Zinc coated push rod tubes
Scat solid racing lifters
Empi bolt on valve cover kit
Cylinder deflector tin
Steel sump plate
Std vw oil strainer

This engine has a compression ratio of around 7.8: 1 and would suit any type 1 , 2 or 3 vehicle . The component value is $ 4276 + assembly of $ 550 . I will let this one go for $ 4500 to the first buyer with the funds . I also have a new set of 40mm dual Kadrons that would suit this for $ 800 extra and this will produce around 75 HP . This engine is in Wollongong NSW and is ready now , ROD , 02-42729920 .




More boost + More fuel = More power
1968 Beetle fastest run 8.96 sec @ 161 mph 4th Nov. 2001
2010 New Beetle 8.12 sec on 8th march 2014
http://www.rodpenroseracing.com.au
Membernbturbo
Veteran Volks Folk
*****


Avatar


Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline

Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder

posted on June 29th, 2010 at 09:30 PM



Another bargain.
Memberbajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
********


Avatar


Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline

Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!

posted on June 30th, 2010 at 10:56 AM



Mr Penrose, i take it that is rwhp?

mmm.... everything brand new. thats a dream for sure :tu:

free bump.




(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. :tu:
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
MemberRodPenrose
A.k.a.: Rodney Penrose
Insano Dub Head
****


Avatar


Posts: 792
Threads: 330
Registered: April 21st, 2005
Member Is Offline

Location: Kembla Grange, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: GETTING FASTER

posted on July 10th, 2010 at 10:18 AM



Chris , this is actual engine HP quoted . This engine will produce 56HP at the wheels on a chassis dyno , ROD.



More boost + More fuel = More power
1968 Beetle fastest run 8.96 sec @ 161 mph 4th Nov. 2001
2010 New Beetle 8.12 sec on 8th march 2014
http://www.rodpenroseracing.com.au
MemberAussie Dubbin
Fahrvergnugen
****


Avatar


Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline

Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )

posted on July 12th, 2010 at 08:20 PM



Rod, just a question, i am hoping to build a 1916 when the funds come up but was hoping i would get many more ponies than 76 or 54 at the wheels.. I'm not baging your prouct but thought this size engine was capableof mor HP? Just looking for info not anything else?



MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on July 12th, 2010 at 08:37 PM



Quote:
Originally posted by RodPenrose
Chris , this is actual engine HP quoted . This engine will produce 56HP at the wheels on a chassis dyno , ROD.


25% drivetrain loss, thats about right.




MemberSuperOwen
Fahrvergnugen
****


No Avatar


Posts: 868
Threads: 67
Registered: January 18th, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on July 13th, 2010 at 06:41 AM



Quote:
Originally posted by Aussie Dubbin
Rod, just a question, i am hoping to build a 1916 when the funds come up but was hoping i would get many more ponies than 76 or 54 at the wheels.. I'm not baging your prouct but thought this size engine was capableof mor HP? Just looking for info not anything else?


Power is in the particular combo of heads, cam, compression etc. Size is only one part of it. The combo above would be a fairly smooth reliable torquey engine. I think Rod has motors with a few more ponies in the shed.......
MemberAussie Dubbin
Fahrvergnugen
****


Avatar


Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline

Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )

posted on July 13th, 2010 at 07:02 PM



cheers that makes sense





  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2025 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.2% - SQL: 98.8% ]