Board Logo
Go To Bottom

Printable Version  
[ Total Views: 673 | Total Replies: 4 | Thread Id: 88208 ]
Author: Subject:  Removing door glass and regulator
Membersmithy68
Wolfsburg Wizard
***


Avatar


Posts: 419
Threads: 145
Registered: October 10th, 2010
Member Is Offline

Location: Adelaide S.A
Theme: UltimaBB Pro Blue

posted on January 18th, 2011 at 05:49 PM
Removing door glass and regulator


Hi I have a 67 beetle wanting to know how to remove the door glass, is it bolted? or does it just sit in the regulator?
Thanks.
MemberLucky Phil
Wolfsburg Wizard
***


No Avatar


Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline

Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!

posted on January 18th, 2011 at 06:33 PM



The door glass is held in the glass bracket which is bolted to the regulator with two 6mm bolts.
Remove these 2 bolts, remove the bolts from the regulator and wriggle the regulator forward.
This should (!!) allow the glass to slip straight out the bottom of the door

This can be tricky, so take it slowly, and persistence pays. Dont forget, it's been in there for a long time.
It's very common for the glass bracket to be rotten and fall apart as you take the bolts out.

Good luck!

Lucky Phil
Membersmithy68
Wolfsburg Wizard
***


Avatar


Posts: 419
Threads: 145
Registered: October 10th, 2010
Member Is Offline

Location: Adelaide S.A
Theme: UltimaBB Pro Blue

posted on January 18th, 2011 at 06:43 PM



cheers mate will have another crack, these bolts are on the inside not visable, I am guessing?
MemberLucky Phil
Wolfsburg Wizard
***


No Avatar


Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline

Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!

posted on January 19th, 2011 at 08:17 PM



Once the door card has been removed, pop the winder handle back on and wind the window down. You will see the bracket come into view sliding down the regulatorand you will see there is a bolt either side of the regulator. The regulator is held in with 1 bolt at the bottom of the door and two at the winder.
All three are in plain sight
MemberLucky Phil
Wolfsburg Wizard
***


No Avatar


Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline

Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!

posted on January 22nd, 2011 at 06:18 PM



Sorry, missed one. there is another bolt at the top of the regulator too.


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 1.8% - SQL: 98.2% ]