| [ Total Views: 2102 | Total Replies: 13 | Thread Id: 97970 ] |
|
|
 69satellite
Casual Dubber
Posts: 33
Threads: 4
Registered: January 1st, 2011
Member Is Offline
Location: Cleveland, TN USA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 23rd, 2012 at 02:18 AM |
|
|
Radiator in a bay?
I really don't want to do the radiator under neath like I've seen most people do on the bay busses. I saw where rocknrob put his up front and I like
the idea. This is for my 72 thats getting a ford 2.3 swap.
But I don't like the idea of giving up the fresh air box. What if I removed the lower vents on the box. Put an elbow on it to direct into the
radiator. Have a hole in the floor like rocknrobs.
Remove this section (thought it might be a clearerpic)
Or am I going to not have enough airflow hitting the radiator? I figure the piping alone from front to back will help with the cooling.
|
|
|
69satellite
Casual Dubber
Posts: 33
Threads: 4
Registered: January 1st, 2011
Member Is Offline
Location: Cleveland, TN USA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 7th, 2012 at 08:13 AM |
|
|
ok. Heres where my thinking has lead me to. ( I know i have some mad mspaint skills.) I will use some type of elbow on the fresh air duct. (Honestly
thinking of using some home HVAC pieces) . But the radiator setup i think would work good, especially with a slim fan. It would cut down on the
thickness of the box, I don't want to lose leg room.
Using a civic radiator
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on August 7th, 2012 at 11:12 AM |
|
|
I like this setup and don't know why others haven't done it. Makes a heap of sense to me.
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on August 26th, 2012 at 09:57 PM |
|
|
You could put two smaller radiators in the engine bay, just needs a bit of effort to panel them in so all the air goes through them from the vents,
works perfectly even in the hottest weather, nothing up the front to take away the look of the car, no pipe work under the car and it is simple, by
the photo's a lot less work..
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on August 27th, 2012 at 05:59 PM |
|
|
^ have you done this vwo60? Be interested to hear your findings.
|
|
|
 MISS VDUB
A.k.a.: Ash
Super Administrator
Mrs KOMBIBOB
Posts: 2565
Threads: 96
Registered: September 20th, 2005
Member Is Offline
Location: Beautiful Sunshine Coast, QLD
Theme: UltimaBB Pro White
Mood: Low down and Dirty
|
| posted on August 27th, 2012 at 07:04 PM |
|
|
Agreed, would love to see some photo's of your setup vwo60 and how you came to these findings?
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
|
|
|
karmann141
Wolfsburg Wizard
Posts: 483
Threads: 47
Registered: August 27th, 2009
Member Is Offline
Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue
|
| posted on August 27th, 2012 at 09:23 PM |
|
|
No vwo60 has'nt but he has certainly helped me with my conversion and he knows that it works.
http://forums.aussieveedubbers.com/viewtopic.php?tid=95862
My twin radiator system in the engine bay has been fine tuned with a set of clear Just Kampers Earz (air intake scoops) and number plate stand-off.
Radiator fans now do not come on driving at any speed and only when stopped in heavy traffic.
1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on August 27th, 2012 at 09:55 PM |
|
|
It took a fair bit of work to get right so it actually looks like the factory did it, just follow the links that karmann141 has posted and you will
see the end resault, the best conversion i have seen with the resaults to back it up without butchering the vehicle.
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 27th, 2012 at 09:59 PM |
|
|
I also still plan on putting in rear corner or corners!
|
|
|
karmann141
Wolfsburg Wizard
Posts: 483
Threads: 47
Registered: August 27th, 2009
Member Is Offline
Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue
|
| posted on August 27th, 2012 at 10:19 PM |
|
|
Picture of my Kombi on vwo60's hoist in his shed.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on August 28th, 2012 at 01:51 PM |
|
|
Ah yes, I remember now, sorry. You're the only guy in the world I've seen that actually made this work properly. 
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on August 28th, 2012 at 03:15 PM |
|
|
Thats better than advising people when you have not actually done it.
|
|
|
karmann141
Wolfsburg Wizard
Posts: 483
Threads: 47
Registered: August 27th, 2009
Member Is Offline
Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue
|
| posted on August 28th, 2012 at 06:32 PM |
|
|
Thanks for the compliment Pete, I'd like to say that I was the only one to make this work, but unfortunately I'm not.
We've all been afflicted by the same 'bug' Hitlers curse and would like to offer credible advise when it is sought. Many of us have have had this
disease for along time and learnt through trial and error as to what does and does'nt work and would like to pass on our experience. There are many
solutions to a problem.
This is but my solution to a problem - its simple, effective and works. May not be everyones cup of tea, but it works and works well.
1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
|
|
|
flatfourfan
Casual Dubber
Posts: 31
Threads: 2
Registered: April 23rd, 2012
Member Is Offline
Location: Pretoria/ South Africa
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 6th, 2012 at 11:52 PM |
|
|
I'd be interested to see how the civic radiator works out for you. I'm doing the same radiator on my speedster with a 2.0 4 banger. Previous
experience with the dual core radiator is pretty good, but then again, that was getting full frontal instead of partial exposure.
Is yours dual or single core? What fan do you have planned? I hear that the oem unit is the best option, but once again, not proven.
|
|
|
