Board Logo
Go To Bottom

Printable Version  
[ Total Views: 643 | Total Replies: 2 | Thread Id: 98186 ]
Author: Subject:  running cold on3-4 cylinders
Membervwmanx
Learner Dubber
*


No Avatar


Posts: 4
Threads: 3
Registered: March 18th, 2012
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on August 5th, 2012 at 04:51 PM
running cold on3-4 cylinders


motor runs fine but cold on exhaust, twin weber 44 idfs,cannot seem to adjust air fuel mixtures hardly makes any difference,blown out idle jets and idle galleries,no difference has anybody had problems like this any input would be appreciated,cheers kevin
Super ModeratorBizarre
Super Moderator
The artist formerly known as blue74l
*******

Rank Avatar

Avatar


Posts: 12737
Threads: 730
Registered: August 25th, 2002
Member Is Offline

Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on August 5th, 2012 at 06:03 PM



g'day and welcome

I am guessing it runs fine on mains.
If you pull plug wires 3 and 4 and there is no difference then you have a blocked idle circuit.
Your mixture screw must make a difference.

I would be pulling the carb and having a real good clean of them.




Futue te ipsum!!!
Membervwmanx
Learner Dubber
*


No Avatar


Posts: 4
Threads: 3
Registered: March 18th, 2012
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on August 7th, 2012 at 03:33 PM



thanks for the reply i think i will have to pull it down and give it a good clean out,cheers kevin


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 4.7% - SQL: 95.3% ]