Vanders ·
Any tips on how to install the front bump stops on a late Type 3. It looks to be near impossible.
Aussieveedubbers · Type 3 and Karmann Ghias
Installing Front Bump Stops... How
https://forums.aussieveedubbers.com/threads/100863/installing-front-bump-stops-how
matberry ·
They just twist on or off, nothing difficult
Vanders ·
Nah. These are new and there is no way I can just twist them on. I think I am going to have to ream them out.
grogy ·
try grease n a rubber mallet
empi ·
Talcom powder.
1303Steve ·
Hi
Any lube you use will make them fall off easier. Talcum powder is my suggestion as well, try leaving them out in the sun for a while to make them softer.
Steve
Any lube you use will make them fall off easier. Talcum powder is my suggestion as well, try leaving them out in the sun for a while to make them softer.
Steve
vlad01 ·
your not strong enough, just push them on, easy.
type3disease ·
Margaret Thatcher on a cold day...
bushed ·
hot water to soften
and G cramp it on...slow and steady with nice smellin powder
and G cramp it on...slow and steady with nice smellin powder
vwo60 ·
Use the old trick, washing up liquid, just dries out and you can wash the excess off.