Aussieveedubbers · Buying, Selling & Swapping Parts

Race Heads Angleflow's to suit 4" Bore

https://forums.aussieveedubbers.com/threads/100905/race-heads-angleflows-to-suit-4-bore

mike64 ·

Heads are in great condition and come with the rocker covers.

These Head's were stripped, checked n serviced when last removed.

Titanium Valve's are 48 In x 38 Ex, And they are cut for a 4" Bore.

Combustion Chamder's are 48 - 50cc

$1000.00 rock bottom No Offers.

You can call me on 0419402752

Mike Waldron Campbelltown NSW 2560

1916baja ·

Wow! Bargain!

bigrudi ·

What ccs mike

mactaylor ·

I think mike said 48cc.

dangerous ·

Are they my old 9.7 @ 147mph second heads Mike?

mike64 ·

Yes Dave I know they were your's before Dave S bought them from you, I wasn't aware of what you had achieved out of them, that was a good number was that with the twin blowers?

dangerous ·

Yes that was 2 blowers and 42psi boost.
I ran about 25 runs with the old blower(10.3's@131), and about 5 with the 2 blowers(9.7@147mph in 1999).
Never melted.
Looks like they have had a lot of work done, since me.
I bought them brand new as bare castings, in 1995 or 1996 and did very basic port work and Manley ss valves.
2919 then 2827cc was the engine I used under them.



mike64 ·

Relisting These also at same price listted, maybe to cheap???

They worked great for Dave Buttler n Dave Stoker on their car's over the year's, I thought I was going to use them, but have changed engine config.

vw54 ·

pics fixed

mike64 ·

🙄 WOW Check These Out 😁😉