Aussieveedubbers · Tech Talk

help

https://forums.aussieveedubbers.com/threads/101796/help

clyve · 28 Apr 2013, 7:32 pm

ok I think I am sure that to remove the cooling fan and the rear case section on a squareback engine the fan if forced off with the 2 m10 bolts off the crank yes?
cheers
vw gods

matberry · 28 Apr 2013, 8:10 pm

I usually split the alloy housing, but yes, after removing the crank bolt, two M8 bolts will push the hub off altho I attach a puller there so as to not damage the case. Easy to make a puller using two M8 bolts, a flat bar with two holes and the long crank bolt

clyve · 2 May 2013, 6:05 pm

thanks has the run to dubs in the abby been sorted yet?