satori ·
Cant seem to find where the mount holes are for the front seat belts. Its a 66 body on a 71 pan. I have the top hole on the pillar but cant find any threaded hole on the floor near the doors. ideas....
Aussieveedubbers · Type 3 and Karmann Ghias
front Seat belt mount holes??
https://forums.aussieveedubbers.com/threads/101887/front-seat-belt-mount-holes
beetleboyjeff ·
It should be at the bottom of the B pillar. Here is a photo of it in my 75 L Bug - should be very similar.
satori ·
Just went and had another look. No holes any where in that area.
shaven ·
hey chris,
mate there may not be one... i believe the top hole was std on all bodies... the bottom one wasnt... it wasnt needed back in the day😂
a few pics:
Top View
Side View - you may have to weld a solid plate into the tunnel with the screw hole for the sealt belt in it... get one cut out of an old body from near the rear tunnel & weld it into the front😎
mate there may not be one... i believe the top hole was std on all bodies... the bottom one wasnt... it wasnt needed back in the day😂
a few pics:
Top View
Side View - you may have to weld a solid plate into the tunnel with the screw hole for the sealt belt in it... get one cut out of an old body from near the rear tunnel & weld it into the front😎
satori ·
Sweet. Thanks for that. I have some 50 x 5mm flat bar at work. I'll get that sorted.
shaven ·
Chris, ill call you tomorrow!satori wrote:Sweet. Thanks for that. I have some 50 x 5mm flat bar at work. I'll get that sorted.