drop spindle camber

Hi guys going to get my drop spindles pressed so I have some canber on front wheels about .5 degrees just wondering how much does it cost to get somethin like this done.

normaly bend the top arms not the spindle.

normally fit offset (aftermarket) eccentric first........that will give you around 2.5 deg neg. If you then want more neg, bend top arms as said by mactaylor.

Thanks guys only lookin for .5 degrees would anyone possibly know wat it roughly cost to bend top arms

If you only want 0.5 degrees neg then all you'll need is the camber eccentrics, like Craigy has said.

If you definitely want to bend the top arms then not too difficult to do yourself - I did mine a few months back, and should be well within what you and JVL capable of.
http://forums.aussieveedubbers.com/viewtopic.php?tid=100412&page=1#pid938509

👍

Cheers ill have a look into the ecentrics and better talk to.the old man

The stock VW eccentrics will give you .5deg neg.

Talk to your old man about bump steer !!!! 😵‍💫😁🙅

Lol i might upset him