Aussieveedubbers · Buying, Selling & Swapping Parts

WTD. Type 3 rear backing plates.

https://forums.aussieveedubbers.com/threads/103082/wtd-type-3-rear-backing-plates

Ian 68 · 13 Aug 2013, 7:39 pm

Hey all,

After a set of rear brake backing plates for a Type 3.

I think ( and I'm happy to be corrected here ) that IRS and swing axle rear plates are the same or at least interchangeable ?
Drop me line if you have anything , PM only please.

Best

ian

Calcool · 13 Aug 2013, 8:29 pm

From memory the backing plates are the same dimensions however the early ones do not have adjustment holes in the backing plates you adjust them thru the drums. However late drums do not have adjustment holes. Therefore you would need to make holes in the early backing plates.

Cheers

David

Ian 68 · 13 Aug 2013, 8:49 pm

Calcool wrote:From memory the backing plates are the same dimensions however the early ones do not have adjustment holes in the backing plates you adjust them thru the drums. However late drums do not have adjustment holes. Therefore you would need to make holes in the early backing plates.

Cheers

David

Thank you David, thats a great help.
Ian

grumble · 13 Aug 2013, 9:33 pm

I have a couple of complete rear brake assemblies from 73's if interested please PM.

Ian 68 · 13 Aug 2013, 9:48 pm

Pm sent