Just Kampers Body Panels

Anyone have any experience with the body panles from Just Kampers?

In particular the fenders/heater channels and floorpans?

I just bought some inner wheel arches and front bottom pillar sections they look nice and thick and service was awesome .............................. I have been trying to deal with my regular guys but I was awaiting shipments and as for another supplier here in oz well they never get back to you hahahhahahahhahahaha o well

are the panels green?

if yes they are the best money can buy.

Nah they are not the green ones as they dont seem to make those for late models..

From what I can gather on the interweb, the heater channels are shite but the fenders and aprons etc are pretty good...

Anyone else got any commentary?

Got some for my bus, they are brazilian. The metal is thick, the pressings are poor. pretty much what you would expect honestly.
But as mentioned. They have get service and free shipping. got to be happy with that

you want Klassic fab panels. The best! after NOS of course.

http://www.klassicfab.com/

there is a reseller of them in Canberra, forgot the name of them.

Just checked out the Kiassicfab sight. They don't seem to have a large range of product! Eg no Beetle hoods, rear fenders at all or am I missing something?

L7back wrote:Just checked out the Kiassicfab sight. They don't seem to have a large range of product! Eg no Beetle hoods, rear fenders at all or am I missing something?

They originally started just making Barndoor and then later split parts.
They are slowly increasing their range of other models but are known as the best split panel manufacturers

Governor wrote:

L7back wrote:Just checked out the Kiassicfab sight. They don't seem to have a large range of product! Eg no Beetle hoods, rear fenders at all or am I missing something?

They originally started just making Barndoor and then later split parts.
They are slowly increasing their range of other models but are known as the best split panel manufacturers

exactly right.

simohagz wrote:Nah they are not the green ones as they dont seem to make those for late models..

From what I can gather on the interweb, the heater channels are shite but the fenders and aprons etc are pretty good...

Anyone else got any commentary?

I bought and installed JK heater channels,
They are thin, you need to enlarge the holes in the pan to line up with the nutserts in the channels, you also need to tap the nutserts,
The first bolt i put in, the b@stard popped off inside the channel, luckily i hadnt welded the channels in yet, so i driled a hole and welded each nutsert to the bottom of the channels.
I also had to drill and weld the underside of each channel along each edge, so i could trim it down (the spotwelds were mostly cut off when i trimmed the edges.
Next time i think i will shell the cash for better channels, and i also had to wait ages for the second channel to show up, and they came pre dinged lol.

I bought a set of A pillar repair panels too, Thin, wasnt impressed with them, got rid of them when i came across a nos set.

I bought a few of the mild steel sheets they offer, they were good.