wtb /fan for inside fan housing - DOGHOUSE FAN

hi ,
i am after the fan that fits at the back of the alternator
[in the fan housing]. Doghouse oil cooler Housing
on the gold coast. QLD
thanks
greg 0406984440

Narrow or wide ie 6v or 12v? Or are they the same? I have a 6v genny with fan attached, happy to separate. In brissie but post to GC is cheap enough.

6vlt early had less blades and noisier than later 6es
wide fans are kombi 12 volt i would say

pfillery wrote:Narrow or wide ie 6v or 12v? Or are they the same? I have a 6v genny with fan attached, happy to separate. In brissie but post to GC is cheap enough.

12 volt come in narrow fan too, all single ports were the narrow fan when they finished in 71.
He's after a doghouse fan which is the wide one.

We have the welded and balanced doghouse fans (sorry no pic):
http://dasrestoparts.com.au/engine-1/fans-and-thermostats/cooling-fans-and-hardware/cooling-fan-welded-and-balanced-35mm-to-suit-doghouse-style-shrouds.html

And also the standard non welded/balanced version:
http://dasrestoparts.com.au/engine-1/fans-and-thermostats/cooling-fans-and-hardware/cooling-fan-late-71-on.html

Happy to help if you can't find a second handy
Al
DAS Resto Parts (07 5568 0143) - Burleigh Heads

thanks ,for the replies, i just picked one up this afternoon.