brujo 路
Hi-I'm looking at getting some wide steelys but the front are 13inch and the back are 14inch- is this legal?
Aussieveedubbers 路 Tech Talk
different wheel diameter legality
https://forums.aussieveedubbers.com/threads/104157/different-wheel-diameter-legality
modnrod 路
Gday.
This might help for rego. It won't help sway the opinions of our finest who knows better, but that's another story (Sorry, do I LOOK like a bikie when on a scooter ?!?!?!?!?! 馃槀)........
http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/pdf/NCOP11_Section_LS_Tyres_Suspension_Steering_V2_1Jan_2011%20v3.pdf
Section 4.2 deals with tyres/wheels.
This might help for rego. It won't help sway the opinions of our finest who knows better, but that's another story (Sorry, do I LOOK like a bikie when on a scooter ?!?!?!?!?! 馃槀)........
http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/pdf/NCOP11_Section_LS_Tyres_Suspension_Steering_V2_1Jan_2011%20v3.pdf
Section 4.2 deals with tyres/wheels.
AA003 路
We first need to know your location.
psimitar 路
section 4.2.4 pretty much puts things into context. 15mm bigger dia or 26mm smaller is what's allowed.
AA003 路
Depends where you live. NSW is 15mm smaller.
www.rms.nsw.gov.au/registration/downloads/vsi/vsi09_rev4.pdf
These are state regulations, the federal standards are only guidelines and are not compulsary.
www.rms.nsw.gov.au/registration/downloads/vsi/vsi09_rev4.pdf
These are state regulations, the federal standards are only guidelines and are not compulsary.
modulus 路
Regs. vary state to state. However, section 4.2.4 of this doco. deals with *tyre* diameter, not *wheel* diameter. A "+2" fitment (i.e. 2" larger wheel diameter with lower profile tyres is, I believe, acceptable in Vic. provided tyre diameter is maintained within these limits.psimitar wrote:section 4.2.4 pretty much puts things into context. 15mm bigger dia or 26mm smaller is what's allowed.
hth
MR930 路
Depends on the year model of the car. Older cars don't need to comply to a lot of the adrs.
psimitar 路
Yes overall tyre diameter not the rim/wheel itself. If anyone reads the article then that should be pretty self explanatory 馃檪modulus wrote:Regs. vary state to state. However, section 4.2.4 of this doco. deals with *tyre* diameter, not *wheel* diameter. A "+2" fitment (i.e. 2" larger wheel diameter with lower profile tyres is, I believe, acceptable in Vic. provided tyre diameter is maintained within these limits.psimitar wrote:section 4.2.4 pretty much puts things into context. 15mm bigger dia or 26mm smaller is what's allowed.
hth