Pan half question · Aussieveedubbers

SebastienPeek · 10 Jan 2014, 7:38 am

Hey all,
Have a quick question in regards to pan halves.

I would like to buy ones that do not have the seat rails already and that are flat (no sunken bit underneath front seat and into the back seat area).

Whereabouts would I find these/do they exist?

Cheers!

Craig Torrens · 10 Jan 2014, 7:44 am

i doubt they exist

debiasi4 · 10 Jan 2014, 8:14 am

They don't make them. But Ian Poynter from unique fabrications makes them for buggys. 0409 673 337 is his number. His workshop is at pooraka. Cheers Adam

1303Steve · 10 Jan 2014, 8:27 am

Hi

Wayne Horsfall makes them for buggies, he's on south coast of NSW, probably too far away.

Steve

SebastienPeek · 11 Jan 2014, 2:47 pm

Did find some pan halves without the seat tracks, might have to modify them myself to have no sunken bit.

CSP sell them for those that are interested.

http://www.csp-shop.com/cgi-bin/cshop2/front/shop_main.cgi?func=det&wkid=21020878838&rub1=Body&rub2=Sheet%20Metal%2CBug%201302%2F03&artnr=12620d&pn=0&sort=0&all=

Craig Torrens · 11 Jan 2014, 9:31 pm

they have seat tracks, well they do in the pics !

Governor · 12 Jan 2014, 8:04 am

SebastienPeek wrote:Did find some pan halves without the seat tracks, might have to modify them myself to have no sunken bit.

CSP sell them for those that are interested.

http://www.csp-shop.com/cgi-bin/cshop2/front/shop_main.cgi?func=det&wkid=21020878838&rub1=Body&rub2=Sheet%20Metal%2CBug%201302%2F03&artnr=12620d&pn=0&sort=0&all=

Good luck trying to import them, the cost for shopping will be quite a lot?
Why not get them here in Aus and just remove the seat tracks?

SebastienPeek · 12 Jan 2014, 6:27 pm

Governor wrote:Good luck trying to import them, the cost for shopping will be quite a lot?
Why not get them here in Aus and just remove the seat tracks?

Why do I need luck to import them?
I just simply enter in my shipping details and pay the amount...

I'd prefer to get quality products that are suited to my needs, shipped to me then buy an inferior quality product to have to hack it up and make it what I need...

vlad01 · 13 Jan 2014, 1:18 pm

watch out on that one. CSP don't always sell quality products.

I got quite a few items from them there were just empi (with actual empi logo) items put in a CSP box. Their website doesn't tell the full story.

bajachris88 · 13 Jan 2014, 1:31 pm

SebastienPeek wrote:
Governor wrote:Good luck trying to import them, the cost for shopping will be quite a lot?
Why not get them here in Aus and just remove the seat tracks?
Why do I need luck to import them?
I just simply enter in my shipping details and pay the amount...

I'd prefer to get quality products that are suited to my needs, shipped to me then buy an inferior quality product to have to hack it up and make it what I need...

I ordered my front, rear and side bars for the baja (bull bars) from USA. shipping ain't that bad 😉 👍