36mm Dellorto jetting

Hoping someone can give me a good start point to jet my 36mm dellorto's on my 1699cc, engle 100 cam, cleaned up ports and 7.5-1 compression in the heavy snail,

At the moment the current jets are

30mm Venturi
60 pump jets, 55 idles, 170 airs, 9164.2 tubes with 132 mains.

This all sounds abit rich to me but I'm just a beginner to this.
Am thinking 28mm vents would be a step forward to gaining abit more down low

have a chat with matt berry, he has just done mine and sourced all the required bits for a reasonable amount as well.
they run about a thousand times better now

Vents will be good!
125 mains and 180 airs all you need

But yeah will certainly run ok as is

Thanks for the replies guys 😎
I have chewed matts ear off enough over the past few months... Thought I would give him a break befor he never wants to see my face again haha

Looks like we aren't to far off the mark by the sounds of it.