jakeandco1958 ·
Any one know of a good rechromer in melbourne? need to get the front and rear bumpers rechormed on my 1971 beetle. How much will it cost me roughly? Bars are not dented and only minor surface rust.
Aussieveedubbers · Tech Talk
rechroming bumper bars
https://forums.aussieveedubbers.com/threads/110582/rechroming-bumper-bars
vw54 ·
This is properly the closest place to get them done
Mine cost $ 300 each a few years ago and make sure you have no dents as they so do repairs
Albury Electroplaters
214 Borella Rd, East Albury NSW 2640
alburyelectroplaters.com.au
(02) 6021 1205
Mine cost $ 300 each a few years ago and make sure you have no dents as they so do repairs
Albury Electroplaters
214 Borella Rd, East Albury NSW 2640
alburyelectroplaters.com.au
(02) 6021 1205
helbus ·
Vinneys in Dandenong do a very good job. $450 each bar
psimitar ·
I think Vlad said Albury were good too. Better than $800 per bumper you get quoted in Brisbane 🤪
Panel beat and file any dents so they either have nothing to repair whether they do repairs or not. The filling of imperfections is what increases the plating cost as copper plating is used as the filler and then is sanded back. This is repeated until the imperfection is gone.
Panel beat and file any dents so they either have nothing to repair whether they do repairs or not. The filling of imperfections is what increases the plating cost as copper plating is used as the filler and then is sanded back. This is repeated until the imperfection is gone.
helbus ·
A.A. Vinney's
24-26 Short Street
Dandenong, Melbourne VIC 3175
Australia
P: 03 9794 7530
24-26 Short Street
Dandenong, Melbourne VIC 3175
Australia
P: 03 9794 7530