$350 - Original Dual Kadrons
A kit was put through them a few years ago and since then they have been left in a box so they may need going over again.
All linkages and parts required to fit to your bug or bus engine.
$? - Lots of splitbus and early bug and Porsche 356 headlight glass - bosch and hella (txt me for more detail and part numbers that you require as there are some sets and some singles)
Bosch 7021 E1 x 2
Bosch VW 1029 x 1
Bosch 1208, k21008 (356 porsche 50 -56?) x 1
Hella 7035 1-914-89 E1 x 1
Hella 7034 1-91490 x1
Hella A 6-22191-1 x 1
Hella A 2-22191-1 x 1
Hella 7009 8-80095 (bug/porsche?) x2
Hella 7072 r7 7072 r1 14-80095 x 1
Hella 900138 x1
Bosch mid sixties bug replacement (no other id) x 1 http://smg.photobucket.com/user/frenzix/library/headlight%20glass
$30 - New Splitbus window slider felt kit
$15 - 1 x Empi Kadron Filter
$15 - New Splitbus Engine Lid Chrome Lock Cover
$90 - Splitbus Horn Button, working
$10 - New Front Indicator Seals US Spec VW Beetle 1945-1957 VW T2 Split 1960-1963
$10 - New contact point set - check part number on box
$80 - 74? Bay Kombi Beam
$15 - New EMPI Air Cleaner for stock VW Beetle carb. 6-3/8 IN.CHROME TOP - 2-1/2 INCH HIGH - GAUZE
$20 - New Number Plate Light Bulb Holder VW T2 Split 1959-1967
Located far north coast NSW, Lismore (2480). 2.5 hours south of Brisbane. Some parts can be shipped, others are too heavy and bulky so please call or sms on 0407 460 828 to discuss.
hus22l ·
Keen on the brake fluid reservoir. Pm sent. Can you post to Sydney? I'll send you a text in the morning
bushed ·
ego-online depot to depot is great value....
bussboy ·
Mate will take the a pillar repair panels. Will message you
frenzix ·
Few bits sold, checkout the headlight glass listing above as you might be able to find that elusive other to make a pair
cam070 ·
Interested in the exhaust. Can you tell me what brand it is and what engine size it suits?
bbbeetle ·
Would you sell the beam separately?
Zimkin ·
How much for the Bosch replacement glass??
frenzix ·
cam070 wrote:Interested in the exhaust. Can you tell me what brand it is and what engine size it suits?
Hi, can't be sure on brand but I think EMPI, I have had fitted to a 1776 and a 1600, sounds great.
frenzix ·
Zimkin wrote:How much for the Bosch replacement glass??
Depends on which one(s) you are after .. Just let me know and make an offer on what you think they are worth to you.
frenzix ·
more parts added.
Willie ·
Are you coming to the Nationals? I'd be interested in the exhaust and a washer nozzle, but freight to Canberra on the exhaust may make it a bit expensive.
frenzix ·
Willie wrote:Are you coming to the Nationals? I'd be interested in the exhaust and a washer nozzle, but freight to Canberra on the exhaust may make it a bit expensive.
Hi washer nozzles sold and no not going to the nats, sorry
cam070 ·
frenzix wrote:
cam070 wrote:Interested in the exhaust. Can you tell me what brand it is and what engine size it suits?
Hi, can't be sure on brand but I think EMPI, I have had fitted to a 1776 and a 1600, sounds great.
If you were to package it up, how big would the package be and how much would it weigh so I can try and get a freight quote? The freight could be a deal breaker.
frenzix ·
cam070 wrote:
frenzix wrote:
cam070 wrote:Interested in the exhaust. Can you tell me what brand it is and what engine size it suits?
Hi, can't be sure on brand but I think EMPI, I have had fitted to a 1776 and a 1600, sounds great.
If you were to package it up, how big would the package be and how much would it weigh so I can try and get a freight quote? The freight could be a deal breaker.
I'll check it out tomorrow as it may need to be courier
frenzix ·
Washer nozzles sold
cam070 ·
frenzix wrote:
cam070 wrote:
frenzix wrote:
cam070 wrote:Interested in the exhaust. Can you tell me what brand it is and what engine size it suits?
Hi, can't be sure on brand but I think EMPI, I have had fitted to a 1776 and a 1600, sounds great.
If you were to package it up, how big would the package be and how much would it weigh so I can try and get a freight quote? The freight could be a deal breaker.
I'll check it out tomorrow as it may need to be courier
Any more info?
I need these details to check courier costs
frenzix ·
cam070 wrote:
frenzix wrote:
cam070 wrote:
frenzix wrote:
cam070 wrote:Interested in the exhaust. Can you tell me what brand it is and what engine size it suits?
Hi, can't be sure on brand but I think EMPI, I have had fitted to a 1776 and a 1600, sounds great.
If you were to package it up, how big would the package be and how much would it weigh so I can try and get a freight quote? The freight could be a deal breaker.
I'll check it out tomorrow as it may need to be courier
Any more info?
I need these details to check courier costs
Sorry I hav'nt had the time although I have been told should be around $50 to post almost anywhere in Aus. Let me know if you are happy to pay around that give or take a few $
frenzix ·
Pencil beam sold, anything you are interested in.. make me an offer.
blink ·
PM SENT
frenzix ·
Cheers, parts listed are still available..
Also have some old Hella spotties and Splitbus parts like Singlecab gates, skins etc
PM me to see if I have something..
adlbeetle66 ·
Can you post up a pic and sizes of any old spotties you have?
Thanks 👍
frenzix ·
adlbeetle66 wrote:Can you post up a pic and sizes of any old spotties you have?
Thanks 👍
Hey buddy, about 16cm edge to edge and 7cm deep.
Hella, made in Germany, part number: 301 112 816
Shown as a pair in the photos
splitbus ·
Mate if I take the door plugs, bus blinker housing and bus fuel gauge, would you post free to Brisbane 4035 cheers Mike
frenzix ·
PM sent
Special Air Service ·
hamucharthey ?
frenzix wrote:Hey buddy, about 16cm edge to edge and 7cm deep.
Hella, made in Germany, part number: 301 112 816
Shown as a pair in the photos
frenzix ·
$40 for the pair
Special Air Service wrote:hamucharthey ?
frenzix wrote:Hey buddy, about 16cm edge to edge and 7cm deep.
Hella, made in Germany, part number: 301 112 816
Shown as a pair in the photos
adlbeetle66 ·
frenzix wrote:
adlbeetle66 wrote:Can you post up a pic and sizes of any old spotties you have?
Thanks 👍
Hey buddy, about 16cm edge to edge and 7cm deep.
Hella, made in Germany, part number: 301 112 816
Shown as a pair in the photos
Thanks for the pics. Was hoping for something a little more retro-looking 🙂
splitbus ·
frenzix wrote:PM sent
Done
frenzix ·
Also have Some Split Window single cab gates, Klassicfab front floor, sills and full front skin for split kombi
frenzix ·
Updated
242 ·
Any pics of the ute gates?
gaz58t2 ·
Pm sent
frenzix ·
gaz58t2 wrote:Pm sent
Should have an idea on size and weight of package this arvo. Cheers
shokwave2 ·
Do you still have the 2x Headlight surrounds and 2x Clear Headlight glass available?
frenzix ·
shokwave2 wrote:Do you still have the 2x Headlight surrounds and 2x Clear Headlight glass available?
yep, pm sent
gaz58t2 ·
frenzix wrote:
shokwave2 wrote:Do you still have the 2x Headlight surrounds and 2x Clear Headlight glass available?
yep, pm sent
PM sent
frenzix ·
shokwave2 wrote:Do you still have the 2x Headlight surrounds and 2x Clear Headlight glass available?
Sorry no, they are set aside for someone else.
frenzix ·
Klassicfab front floor and front skin sold.
Updated prices and listings.
frenzix ·
Also have a 1961 Single Cab 90% complete, needs resto.. $10,000 ono, contact me for photos if interested 0407 460 828
4kombiswilldo ·
ill take the spli tscreen wiper spindle if you still have it.
p.m. me please
frenzix ·
4kombiswilldo wrote:ill take the spli tscreen wiper spindle if you still have it.
p.m. me please
PM sent big boy
frenzix ·
Semaphores sold
frenzix ·
Wiper spindle sold.. still have some other parts as listed.
wombatventures ·
Is the fuel pump still up for grabs?
frenzix ·
wombatventures wrote:Is the fuel pump still up for grabs?
yup.. everything pictured is still available.
Baz1313 ·
Hey mate the heater channels fit 70 beetle text me Baz 0417629025
frenzix ·
Baz1313 wrote:Hey mate the heater channels fit 70 beetle text me Baz 0417629025
Hi, as the ad says "1946–1968"
frenzix ·
single cab and gates sold
Dannyred ·
PM sent re front floor and gates
frenzix ·
Dannyred wrote:PM sent re front floor and gates
No you didn't.. but that's ok as they are sold
frenzix ·
1600TP sold
lisian_1275 ·
Interested in the Kadrons, is it possible to contact you to have a talk about them?
Also whereabouts in Sydney are you? I am in Wollongong.
Thanks
Ian
frenzix ·
Hi Ian, no worries call 04-07-46-08-28
I am not in Sydney, North NSW... can post
frenzix ·
lisian_1275 wrote:Interested in the Kadrons, is it possible to contact you to have a talk about them?
Also whereabouts in Sydney are you? I am in Wollongong.
Thanks
Ian
Hi Ian, I just tried calling you back but I have poor reception.. just PM me for any further detail mate.. cheers, Tim