As pictured.
Approx 195mm long. Holds the butterflies / throttle plates.
Need a new one as my thread is stripped 馃檨
Thanks
Denver
adlbeetle66 路
Aussieveedubbers 路 Buying, Selling & Swapping Parts
WTB: 44IDF Weber Throttle Shaft
https://forums.aussieveedubbers.com/threads/111068/wtb-44idf-weber-throttle-shaft
adlbeetle66 路
Bump.
Part #: 10005.243
Part #: 10005.243
vduboy 路
You can still buy them new mate, http://www.weberperformance.com.au/index.php?cPath=29_231_232&&page=2
I had to buy two for my webers. not cheap though.
I might have a usable one at home, pm me to remind me tomorrow night when I am home. I think you have to drill the offset hole in the new shaft if you go that way. Pain in the ass!
I had to buy two for my webers. not cheap though.
I might have a usable one at home, pm me to remind me tomorrow night when I am home. I think you have to drill the offset hole in the new shaft if you go that way. Pain in the ass!
adlbeetle66 路
Cool as Nathan
Found 2 more places you can get em:
http://www.piercemanifolds.com/product_p/pm3721.htm
http://vwparts.aircooled.net/Weber-44-and-48-IDF-Throttle-Shaft-EACH-10005-244-p/10005.244.htm
Better priced than from Weber 馃檪
I'll PM you tommro night 馃憤
Found 2 more places you can get em:
http://www.piercemanifolds.com/product_p/pm3721.htm
http://vwparts.aircooled.net/Weber-44-and-48-IDF-Throttle-Shaft-EACH-10005-244-p/10005.244.htm
Better priced than from Weber 馃檪
I'll PM you tommro night 馃憤
Old Dubber 路
Just cut a new thread on the shaft