Looking for anything 1776 or larger
If it needs work, it's ok as long as it's usable
Preferably in Melbourne
Rafik
Kew East
karmannghia60 ·
Aussieveedubbers · Buying, Selling & Swapping Parts
WTB: larger than stock engine or parts
https://forums.aussieveedubbers.com/threads/113549/wtb-larger-than-stock-engine-or-parts
hulbyw ·
Don't have an assembled engine but do have surplus to requirements a dual relief case line bored and machined to take 90.5,s. Also have a reground crank and bearings to suit. Neither have been assembled/used since machining. Also have a reground cam (Wade 149/Porsche Super 90 grind) and lifters.
Cheers.....Wayne
Cheers.....Wayne
karmannghia60 ·
PM sent
karmannghia60 ·
Bought the parts from Wayne (Thanks Mate)
Now looking for heads and pistons/cylinders if anyone has some floating around to suit a 1776 or 1835
Cheers
Now looking for heads and pistons/cylinders if anyone has some floating around to suit a 1776 or 1835
Cheers
bushed ·
Have some 91mm ? (willcheck) pistons and barrels, need new rings due to breaking 2
from 1800 eng? didn use emm, due to mate giving me a good larger 93mm set at the time.. pm if keen
from 1800 eng? didn use emm, due to mate giving me a good larger 93mm set at the time.. pm if keen
Walka ·
I have a set of used 1776 barrels and pistons , they need to be honed and you need rings $200.00
karmannghia60 ·
So far I found a case, crank, cam, followers, rods and a pair of 40 DCNF
I think I will buy a new set of P&C
Still need a pair of heads and linkage for the DCNS. Anyone has something to offer?
I think I will buy a new set of P&C
Still need a pair of heads and linkage for the DCNS. Anyone has something to offer?