I know this is a long shot as most folks chuck these out but I am converting to a doghouse fan shroud and am hoping to find a set of flaps or at least the rear operating arm which clears the doghouse so I can modify my original non doghouse flaps.
Cheers..........Wayne
viiking ·
The internal flaps for dog-house and non-doghouse are the same. Only the operating lever changes.
hulbyw ·
Yes, looks like I may have to make one
Cheers
viiking ·
Here's the official part drawing and subsequent part number pages. You need part 31, 113119289B
You can google that part number but make sure it has the B suffix or you will get the non-doghouse one. There are some on the web but most are overseas so you get slugged with postage.
I have my engine out at present and can take a tracing of it and email it to you if you like in case you want to make one.
PM me if you need it.
hulbyw ·
Great offer. PM sent
6621104 ·
to clear the doghouse - he will need 2 of #35, and # 31 with the clips/washers.
hulbyw ·
Thanks. Still haven't exhausted all avenues but looking like I will need to manufacture my own. Doesn't look too difficult. Price from Awesome Powdercoat is a good incentive to get cutting bending and drilling
Cheers