stainless trim

with the two tone paint I find that my stainless trim strip is visualy lost.could I replace these strips with the early wide ones?I know the clip holes will have to be drilled bigger.has anybody done this?the front-side strip seems longer on mine(Sbug)but the rear,in the wide,might be the right size to do the front as well. any help?
ROB

come on somebody must of done this before.......please🙁 you know what I mean ,it is just lost in the two tone.

two tone paint I find that my stainless trim strip is visualy lost.

I would paint the thin stock trim in a dark colour 2 pak paint this would enhance the 2 tone paint section.

Dont know if the earlier wide trim would fit the later car.... Paint would look better...

was looking at some old stainless trims today and think I can do it,the doors are the same-the backs are good -and I will use back ones for the front as the old stainless one are shorter. will post pic when I do it

Rob get some old trim and spray it with enamel black to get an idea of what it would look like..

I think the wide early model trim would be a lot of stuffaround...

As you say it just needs an outline to high light it

sorry dave forgot to check this post... sent you a u2u