GALVENISING floorpans

Anybody done it ?

was it hard/worth it ?

is it expensive, and does the inside of the tunnel also get coated?

I thought it may help if the vehicle was being used on the beach etc
:thumb

Anybody done it ? - Yep

was it hard/worth it ? - Nope

is it expensive, and does the inside of the tunnel also get coated? - No and yep

Wouldn't waste your time it is a pain in teh ass and takes hours to clean the hoiles and retape the threads.

manx020 on here has his current Manx done

Get it blasted and the POR 15 you could run it down inside as well... but you would have to degrease the insides first.

I think this would be cheaper n better

I looked into this a few years ago. A mate worked at a factory that did gal and told me it wouldnt be worth it. It would also cost a fortune. Like vw54 said, por15 is the go, after you acid dip the pan. Acid dipping gets into absolutely everywhere including the tunnel. When you have finished with por15, spray a product called Lanotec ( made in Qld from sheep ) inside the tunnel. This helps with corrosion. it is similar to using fish oil only it dont smell as bad and work 100 times longer and better. I sprayed it on a sand blasted shell 18 months ago and left it outside with only a small tarp to cover the windows. NO RUST YET.

Cheers Todd :jesus

thanks to all :thumb

Just making sure before I have the pan shortened and painted !


How do you remove the lanotec ? thinners ?

a product called Lanotec ( made in Qld from sheep ) inside the tunnel

1 of the BEST product you will ever come across... I discovered it about 18months ago

ITS BLOOODY GREAT