Aussieveedubbers · Offroad V-Dubs

HEADLIGHT housings for beach buggies

https://forums.aussieveedubbers.com/threads/17058/headlight-housings-for-beach-buggies

Craig Torrens ·

Where do you buy headlight housing/units for buggies ?

what is best to use, rubber or steel ?

I have seen nice chrome ones bought from a motor bike shop used, but I thought they may crack after continual offroading etc
I think Hella make a rubber one used on bulldozers, are these good !:jesus

daz67 ·

Quote:"I have seen nice chrome ones bought from a motor bike shop used, but I thought they may crack after continual offroading etc "
==========================================================================================

My Headlights are about the only original thing left on my Buggy, they must be over thirty years old still good.

It only gets driven on Sundays though!!!!!

handycam ·

i would like 2 no 2 do thay make a light caseing in steal 2 take a standard seal beam or light insert??? 🙂:thumb

MickH ·

Anything at the Manx club??
www.manxclub.org
:bounce

Brad ·

Mick H wrote:Anything at the Manx club??
www.manxclub.org
:bounce
Will do in teh new year.. be around $250 complete with H4 inserts for members and $900 for non members :P

manxed69 ·

Mine are sealled beam, and the rust that starting to appear after three years has been thrown in for free. Brad I hope that the ones that your going to offer for sale are alot better than mine.

🙁

Craig Torrens ·

MAKE IT $1100 FOR NON MEMBERS 😀

handycam ·

i agre now that im a member:thumb

11CAB ·

I'm using 5 3/4 inch headlights for my manx....I bought chrome spotlights from a 4wd shop and then got H4 inserts for them which has the high & low beams as well as the park light......I prefer the smaller headlights to the 7 inch ones that most buggies are using.

The_Bronze. ·

Chack up on the ADR's if you are reregistering your buggy as they are quite strict - as you know. The most recent one that raised an eyebrow for me was this one:

"ADR 12 - Glare Reduction in Field of View
The function of this Australian Design Rule is to minimise the glare from certain surfaces in the view of the driver.


Bugger. I hope I'm wrong. Engineers may choose to dot i's and get you to matt balck you lamp casings.

A good website to read before expenditure on the SWB buggy is sharpbuilt buggies which links to this source.
Source - http://www.dotrs.gov.au/transreg/str_adrindx.htm

Craig Torrens ·

good point :thumb