what wheels fit kombi

bay window ,i have heard
merc
audi
ford,
is this right and what year models for the right dish to suit,,
cheers

Kombi wheels fit :P😀

I'm currently running Mercedes 61/2"x15H2, ET49 which fit ok, but run a bit close to the inside. With my current tyres (205/60R15) I get 5-10mm clearance to the spring plates. I believe ET37's are better.

I have recently purchased so 16" rims from a BA Falcon from DesertBug in Bendigo. Although Falcon wheels don't fit exactly in stock form, he machined the countersinks for the stud holes so they will fit perfectly. Check here for pics and details

so if i got et37 wheels can i run a rear 235.75.15 rv tyre on the rear and a 205.75.15 front rv tyre
want that baja look but without huge lift,my kombi for some reason sits high.and there is not mods to the beam,its my first one so maybe thats the way they are...
cheers
😎😎😎😎😎😎😎

Yeah no probs with 235s on the back on Merc 15x6.5 ET37s, I ran these on a '74 Bay MB for some time, were Dueller MTs, look tough and great offroad. Had 215/75s on same rims on front (Dueller ATs) which gave a good balanced look.

😀cool so now where do i get the rims from..cheers

I have a set in xlnt condition for $200

To try to pull together the various bits of information available here, from the regulatory authorities and from other sources I've created a project called "Big Bay Wheels", found at
http://www.aussiekombicampers.com/projects.shtml#bbw

It's not yet complete, but it will improve over time.

hth

Good work modulus.:thumb:thumb

Now what was all that talk about LT’s??

Modulus you are a marvel. That is very informative an d clear
Cheers paul

i also believe the mazda rx wheels are a 5 x 112mm 45 mm offset and will also fit,

Andy

Do they look like this?.. If so I am looking for a set

kustomkool wrote:I have a set in xlnt condition for $200