Re: 2ltr kombi box info

Does anyone know the VW part no for the 2ltr manual kombi box bellhousing?

cheers Steve

steve, posted your starter off today matey, expect it in a couple of days, thanks, Andy

dont have a bellhousing, do ya Andy?

dakdat buggy wrote:dont have a bellhousing, do ya Andy?

Steve I have one maybe.
I think I do anyway could be 1800, It looks the same on the outside as my 2lt put i think 1.8 look the same but the starter pin holes are different. my motor and box are in the car at the moment so I can't see what the 2lt looks like. So tell me what i'm looking for and I'll tell you what I have. BTW you can have it if its what you want

:thumb :duh

Not sure of the exact number, but 091 denotes 2L, 3xx is for gearbox so it will be something like 091 301 xxx , or 091 311 xxx......etc.....the important thing is 091 for 2L

11CAB wrote:Not sure of the exact number, but 091 denotes 2L, 3xx is for gearbox so it will be something like 091 301 xxx , or 091 311 xxx......etc.....the important thing is 091 for 2L

hehe, that's so obvious I can't believe I didn't think of that!

Your a thinker.

if 091 is 2lt, thats what it is :thumb

11CAB wrote:Not sure of the exact number, but 091 denotes 2L, 3xx is for gearbox so it will be something like 091 301 xxx , or 091 311 xxx......etc.....the important thing is 091 for 2L

xcellent 11CAB thankyou....

Desert Moose wrote:if 091 is 2lt, thats what it is :thumb

Chris....$15.00 will cover it...please email your addy...will send payment with my details..

Cheers Steve

Mate the easy way to tell is the lower mounting holes for where the motor bolts go in are longer than the 1800 ones so compare and theres your anser but make sure you know what the one that your comparing it to is :blah:blah:blah

I have just had a look at my 2ltr sitting on the shed floor. I can not find any part numbers on the outside of the bell housing.

Old Dubber wrote:I have just had a look at my 2ltr sitting on the shed floor. I can not find any part numbers on the outside of the bell housing.

u wont..u need to remove the bellhousing from the box...

u need to remove the bellhousing from the box...

Well, if you still want the part number, you will have to wait till the weekend.

Mine was a 2lt and it in the post to him. that what the $15 was for post :duh

Chris...done!


cheers Steve



ps: thanks Old Dubber

bump