Aussieveedubbers · Tech Talk

Replacing stubborn tailpipes

https://forums.aussieveedubbers.com/threads/2600/replacing-stubborn-tailpipes

Pat · 23 Dec 2002, 1:58 pm

Does anyone have any tricks for this?, I've scraped out the gasket, soaked the joint with penetrating oil, and they just will not budge.

Grey 57 · 23 Dec 2002, 2:22 pm

Get a pipe wrench on them Pat and twist them back and forth. If you can heat the muffler bits were they go it might be handy too. I saw these on you car the other day, you could always just wait until they rusted away. Buy the looks of them it wouldn't be long😀😀😀

Have a good one mate:beer

[Edited on 23-12-2002 by Grey 57]

Pat · 23 Dec 2002, 4:20 pm

I know, they look like they're from a shipwreck.:beer:beer:beer

vw54 · 26 Dec 2002, 8:16 pm

cut them off level with the muffler then use a hacksaw blade saw to split the pipe where it goes inside the muffler.
this way you can pry out the section using some pliers.