Aussieveedubbers · Tech Talk

Splitty extractors

https://forums.aussieveedubbers.com/threads/29081/splitty-extractors

57kombi · 23 Sep 2004, 3:45 pm

Just wondering if any splitty owners are running extractors and what fits a lowered bus.
I would like a stainless exhaust but I dont know what will fit as my bus is quite low

Cheers
Dave

Menangler · 23 Sep 2004, 4:51 pm

I run just the normal large flange Thunderbird extractors with a tuck away muffler that fits up under the guard on my ute. doesn't hit anything and has good clearance.

matara · 23 Sep 2004, 5:52 pm

Dave,

Have a look at the latest copy of Ultra VW (Issue 11). there is a lowered straight axle conversion candy red splitty in there that is running extractors and a turbo muffler.

Cheers

Steve

Found this link but not much help on the muffler:-

http://www.ultravw.com/ultra_vw/eyecandy.html

[Edited on 23-9-2004 by matara]

silver · 23 Sep 2004, 6:43 pm

I have the Berg merged system under mine, haven't banged it yet.

vwtyp2 · 23 Sep 2004, 6:49 pm

shouldn't cost too much to get a custom job from the header flange.
just go to your friendly local exhaust shop and get them to fit it up.

ClassicVW(pacific) · 23 Sep 2004, 7:03 pm

Have been onto SSP who have replied with the following
"a single quiet pack or a turbo muffler are the most popular with the sqp having slightly better ground clearance".
We had ours ceramic coated by a Brissy company who charged $200 for the complete system, looks good too and cuts down the heat in the engine area