I have the following parts for sale. They come off a '68 T1 pan with ball joint front and IRS. They have the stock VW 4 stud pattern of 4 x 130 pcd.
Front disc rotors They were machined but not used & now have slight surface rust. They come complete with new bearings and seals according to the previous owner. I confirm that the outer bearings are new quality German FAG brand but can't really check inners without removing the seals. They measure 8.5mm thick & the min thickness allowed is 8mm. Looking for $75 ono
(to give you an idea on cost, I just bought new bearings and seals for $63). * they are off the later '68 model with 29mm ID inner bearings and should fit later model beetles and supers *
Complete rear brake drum assembly. This is complete from the backing plate out, both left and right sides. The backing plates are in good condition. They have been fitted with new wheel cylinders and brake shoes & the drums were machined but now have slight surface rust. Looking for $135 ono.
(I believe new shoes & wheel cylinders will cost about $90)
Name: Jenny
Ph number: 07 38090715
Suburb: Forestdale 4118
I can email pic's if required.
I also have 15" wheels & tyres for sale, per this post http://www.aussieveedubbers.com/forum/viewthread.php?tid=29940
[Edited on 26-10-2004 by Jenny]
Jenny ·