Aussieveedubbers 路 Members Rides

My UK \'66 Resto-Cal Bug

https://forums.aussieveedubbers.com/threads/32196/my-uk-66-resto-cal-bug

crazydaze 路

Nice site guys, I have posted these pics of my UK '66 Resto-Cal bug on the General Forum on a thread, but I guess they probably sit better here!

Looks like I have another cool forum to check up on now. One of my mates from the UK is over in Oz at the moment and put me onto this site......cool as!!! watch it though, he seems to have made it a personal quest to buy all your knackered Ovals!!!!!!!!!!

Here are some pics of my '66 1300 UK Resto-Cal Bug. I have owned the car for 9 years, at last it's getting to how I have always wanted it, Bodywork and paint (bare metalled) was restored in 1995 soon after I bought the car however the accessories/stance have been added over the past few years as and when I could afford it. The 90mm narrowed beam is probably the major addition in the past few months.

Cheers

Alex


cheers smikuk for the pic BANDIT 馃槈







[Edited on 27-11-2004 by crazydaze]

[Edited on 27-11-2004 by crazydaze]

[Edited on 13-12-2004 by crazydaze]

[Edited on 13-12-2004 by crazydaze]

Resto64 路

looks great mate
front sits nice ,do you get wheel scrub still or was 90mm
good
do you have 4.5's on the front and 5.5 on the back cause thats the look i want!!!

crazydaze 路

No scrubbing AT ALL!!!! It's running 5.5j Polished Empi 5 replicas all round, the front is a narrowed (90mm) balljoint beam with sway away adjusters and CB Dropped Spindles, Shock towers have been modified and there are no inner wing or headlamp bowl modifications. Front tyres are 135 Firestones. The rear is turned one spline, and has dropped nicely (approx 4 inches)馃槈 tyres are 195/65's for the nice FAT/skinny GFK stance!!!

Alex

[Edited on 27-11-2004 by crazydaze]

crazydaze 路

Oh yeah, as far as I know, you can't get 4.5j Empi/Eagle/ 5 spoke replicas, the only "True" 4.5j's for a wide 5 lug bug are GENUINE Fuchs 4.5 earlies, Porsche 356 4.5j's and Empi Sprintstar 4.5j's. All the replicas of BRM's, and Fuch's that are 4.5j have the inch taken out of the BACK of the wheel, thus the track of the car will remain the same as a 5.5j version - be warned!!!! Also the CB performance beams that are narrowed 2 inches will still cause some headaches with tyre rub if you use the dropped spindles as well, plus you would not get the real "tucked under" stance.

This thread will probably be of use/interest to you!!!:

http://restowagenuk.com/bb/viewtopic.php?t=458

Alex

[Edited on 27-11-2004 by crazydaze]

Resto64 路

thanx for the tips
will help alot
Paul

shmikuk 路

I love this car! It drives as good as it looks too!!! Fast, smooth and fun!!
Oh, Resto 64, dont forget that Crazydaze's car is balljoint front end, I assume yours is King n Linkpin!?!

shmikuk 路

I love this car! It drives as good as it looks too!!! Fast, smooth and fun!!
Oh, Resto 64, dont forget that Crazydaze's car is balljoint front end, I assume yours is King n Linkpin!?!

Resto64 路

yer it is
hey if i get the beam narrowed 2 inches with no drop spindals will the empi 5's still rub ?
will the 5's bolt straight on ?

shmikuk 路

We've just been looking into this on an early 65.....its gonna be tight! it all should be cool with the wheels straight ahead, but there could be some clearance issues on lock! this is with 135/15s. Smart car tyres 145/65/15s would help but dont quite look right IMHO!馃槈 All depends how low you want togo, and what tyres etc. Apparently American Eagle Empi 5 Replicas have a better offset than others!
Ask Andylham on restowagenuk, as he has eagle 5s on his 58 with a 2" narrowed beam at the mo! 馃槈

shmikuk 路

DOH! Just read that again, and you said "NO DROP SPINDLES"! Should be OK, as the one we've been looking at had em. Adds about half inch per side to the track!!!:blush

crazydaze 路

shmikuk wrote:DOH! Just read that again, and you said "NO DROP SPINDLES"! Should be OK, as the one we've been looking at had em. Adds about half inch per side to the track!!!:blush
But they VASTLY improve the ride comfort 馃槈

When you narrow a beam, remember that the adjusters firm the suspension up as you wind the ride height down, add to this the effect of narrowing the torsion bars which stiffens the suspension further as the loads are transferred through a less pliable set of leaves (they have less "travel" in them the more you shorten them). So losing 2 and a half inches of suspension travel with NO loss of ride quality is a useful addition in helping to prevent shaking your fillings out!!!!!!!!! it will also shake your partners airbags less so there is a down side to them 馃檪

Alex

[Edited on 27-11-2004 by crazydaze]

t2 路

if i saw this on the road i would need a dribble bucket. love it

crazydaze 路

Cheers dude 馃槈

Alex

shmikuk 路

This is why I cant keep up with crazydaze on the cruises!

And the only thing louder than the induction roar and the single glasspack is the STEREO!!!!!!:P

62deluxe 路

SCHWEEET bug mate. Looks fantastic on the road.........:thumb馃槑:thumb

57 Chook Shed 路

Bet it`d go even quicker without all that crap on the roof rack!
Only joking mate, cool ride, stuff that dreams are made of.
Graham.

crazydaze 路

57 Chook Shed wrote:Bet it`d go even quicker without all that crap on the roof rack!
Only joking mate, cool ride, stuff that dreams are made of.
Graham.
Cheers Guy's:thumb

That's what everyone says馃槈

But then again if I was going TOO quickly no one could admire it:duh

Alex

[Edited on 3-12-2004 by crazydaze]

shmikuk 路

Heres a pic I took at the weekend for Alex!馃槑

DOH! Pic too big! Here ya go:

[Edited on 6-12-2004 by shmikuk]

VWFREAK 路

Fully sick mate. Love ya work.:thumb

crazydaze 路

Cheers馃槈


shmikuk 路

:tree

Any new additions over christmas dude?

馃槈

crazydaze 路

thanks to santa馃槈



Mobil Oils Pegasus Safety Plaque - crap pic I'll post another one at the weekend.

And yep....

....it's as cold & miserable as it looks in the pic here at the moment!

Alex

[Edited on 28-12-2004 by crazydaze]

timc 路

something else to fall off eh? 馃槈

Looking good mate.

Anyway - what is G doing on here :jesus

Dasdubber 路

Very kewl. 馃槈

Thats a whole lotta negative camber on the back! The whole style looks fantastic, you've done very well.

:beer

crazydaze 路

Dasdubber wrote:Very kewl. 馃槈

Thats a whole lotta negative camber on the back! The whole style looks fantastic, you've done very well.

:beer
Cheers Dude!

One outer spline turned at the rear, running 195/65's, works a treat hey馃榾

Alex

64vwmark 路

Very nice car mate. Good work!

crazydaze 路

Cheers:blush

Alex

crazydaze 路

some latest pics from the weekend, thanks E and Soph!!!

Show season starts over the next few weeks, so HELLO summer馃槈








Alex

[Edited on 17-3-2005 by crazydaze]

Octa 路

Great photos... Look at those curb watcher thinghys, the camera captured them moving, or are there two up front and two int he rear? :bounce

crazydaze 路

Octa wrote:Great photos... Look at those curb watcher thinghys, the camera captured them moving, or are there two up front and two int he rear? :bounce
They are bouncing! BUT they are a pair at the front and back馃槈

If ya interested in a pair of your own:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4535277737&category=42606

I don't know how legal they are in OZ, but here in the UK my mate just got fined 60 pounds and 3 points endorsed on her licence 'cos the policeman said he thought they were dangerous!!!

Alex

crazydaze 路