11CAB ·
Aussieveedubbers · VW Pic of the Week
L Bug Baja....who said it can't be done......
https://forums.aussieveedubbers.com/threads/32711/l-bug-bajawho-said-it-cant-be-done
ColumBUS ·
hmmm...
just by lookin, and im no expert, but that look like the bodys propped up on another chassis, which is sporting different axles.
bug body, sierra chassis, hilux axles?
just by lookin, and im no expert, but that look like the bodys propped up on another chassis, which is sporting different axles.
bug body, sierra chassis, hilux axles?
carisma ·
coolllllllllllllll
Doug Sweetman ·
Ummm, dont think so - sierras are front engined and I cant see radiator etc
I had a go at the photo above - looks to me like someone has just grafted a beam front frame head on the floorpan
I had a go at the photo above - looks to me like someone has just grafted a beam front frame head on the floorpan
68AutoBug ·
Would be lots of mods to the front end...
as the coil springs-McPherson struts are bolted to the BODY Not the chassis as in normal Beetles...
and in standard form...
hitting the gutter can damage the front suspension - strut mounts... bend the body...
and then in 1976 came the Best Beetle Made :-----
Torsion Bar front end - flat windscreen - IRS rear - etc etc...
"They saved the Best till Last......." IMHO..
Lee
as the coil springs-McPherson struts are bolted to the BODY Not the chassis as in normal Beetles...
and in standard form...
hitting the gutter can damage the front suspension - strut mounts... bend the body...
and then in 1976 came the Best Beetle Made :-----
Torsion Bar front end - flat windscreen - IRS rear - etc etc...
"They saved the Best till Last......." IMHO..
Lee
ColumBUS ·
true, didnt think about radiators, although i have seen a few trick set ups. this blokes either nuts or a real vw enthusiast to have done this all the same. salute!
Doug Sweetman ·
I think it looks awesome !
type1ute ·
it sure looks like beam front end with longer trailing arms
VWFREAK ·
What a beast.
pete wood ·
this is a sth african "S Bug". it is swingaxle and beam front but with a curved and screen and padded dash. Belongs to a guy I know off the web.
Cheers to Keith.
It featured on the golden bug website this month.
Cheers to Keith.
It featured on the golden bug website this month.
Desert Moose ·
I think it look's cool, and I would say it was some what stock with the body cut away......
It may not be as strong but it would work
(and the white one look's cool as well Pete)
[Edited on 10-12-2004 by Desert Moose]
It may not be as strong but it would work
(and the white one look's cool as well Pete)
[Edited on 10-12-2004 by Desert Moose]
WABaja ·
There are a couple of them in Perth, Kurt built a Real nice one for a guy a few years back.. Not sure where that car is now...
They do make a Baja kit for them and I have the rear guards off an L Baja kit on my car..
They're heaps wider than standard early baja guards and look a bit squarish and boxy but allow great clearance and tyre covearage compared to normal ones..
Very Hard to find though...
[Edited on 14-12-2004 by WABaja]
They do make a Baja kit for them and I have the rear guards off an L Baja kit on my car..
They're heaps wider than standard early baja guards and look a bit squarish and boxy but allow great clearance and tyre covearage compared to normal ones..
Very Hard to find though...
[Edited on 14-12-2004 by WABaja]
Doug Sweetman ·
and what do they do with the front end ?
Anthiron ·
either weld a beam frame head and put a B/J ot K/L front end on.....or strethen the mounts for the struts and reinforce everything.
theres a yellow superbug baja that gets around to shows in QLD with a v8 in the back of it ill find a pic.
theres a yellow superbug baja that gets around to shows in QLD with a v8 in the back of it ill find a pic.
Anthiron ·
.
Cam ·
That looks like it has th standard L-bug pan from what I can see but on a lift kit. Can anyone else make out the hammer head style 'pan end under there?
The L bug should be fine for off roading. Just reinforce your strut mounts and it should be cool. All your big 4x4's run mcpherson strut and they all seem to be doing all right.
The L bug should be fine for off roading. Just reinforce your strut mounts and it should be cool. All your big 4x4's run mcpherson strut and they all seem to be doing all right.
pete wood ·
mmm, don't think so. Unless u describe Pajeros as "big" 4wds, and they aren't strictly macpherson strut. Big ones uses torsion bar Ifs, or even better for mental offroad stuff, live front axle.Cam wrote:All your big 4x4's run mcpherson strut and they all seem to be doing all right.
Desert Moose ·
macpherson strut bug's DON'T make good race cars BUT... they make good Baja's for the road and a bit of sand and light off road......
A good friend of mine has one and it never been a problem to him. It all comes down to how you use it...
Edit" BTW one raced in WA in class4 for 8 years.......and won class 3 years in a row
[Edited on 15-12-2004 by Desert Moose]
A good friend of mine has one and it never been a problem to him. It all comes down to how you use it...
Edit" BTW one raced in WA in class4 for 8 years.......and won class 3 years in a row
[Edited on 15-12-2004 by Desert Moose]
Bizarre ·
Does this count
The boys use to beat this round the Mortlake Speedway and there were some REAL decent jumps on that
The boys use to beat this round the Mortlake Speedway and there were some REAL decent jumps on that
wrecker67 ·
is that your new car barry..........
be good for the summer nights cruisng....
cheers:beer
be good for the summer nights cruisng....
cheers:beer
11CAB ·
Here's another pic