Any pics you've got of Aussie bajas in action - post them here!! :bounce
[Edited on 16-1-2005 by Beaker]
Beaker ·
Aussieveedubbers · General Chit Chat
Show us your baja action pics
https://forums.aussieveedubbers.com/threads/34218/show-us-your-baja-action-pics
Anthiron ·
but ive got a couple.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Anthiron ·
.
Secoh ·
http://loud-noises.com/Forumstuff/012.jpg too big to post in the forum
more HERE
[Edited on 16-1-2005 by Secoh]
more HERE
[Edited on 16-1-2005 by Secoh]
11CAB ·
Here's some of mine
11CAB ·
another
11CAB ·
another
11CAB ·
another
Flying VW ·
My Baja is a Lover not a Fighter, this is all the Action it can handle. :kiss
DubCrazy ·
this is my old baja(just bought it back 2 years on and totaly fucked)
DubCrazy ·
just got back from some muddy fun 😉😉
MUD BASHING ANYONE ?? ·
I would show a few of mine but im hopless with a computer so just look at the avatar and picture that car in a lot of intersting spots
psychobuggers ·
:bounce
Beaker ·
psychobuggers - I see how you got your name! How was the car after that?
Flying vw - How did you manage that?
11 cab - I love those wheels, are they alloy? Do you have any more pics of how the new baja is going?
Stef - Was that an oval? Is it salvagable at all?
Flying vw - How did you manage that?
11 cab - I love those wheels, are they alloy? Do you have any more pics of how the new baja is going?
Stef - Was that an oval? Is it salvagable at all?
Doug Sweetman ·
Good action shots one and all !
traumin ·
Mine will be MUCH MUCH better soon
ratty 63 ·
...Baja action pics.... let me see what I can find.
None of mine yet (unfortunatly), but I have a few of Dave and Tim (Mud Bashing) that I'm sure that they wouldn't mind if I posted...
Dave - out in the bush
None of mine yet (unfortunatly), but I have a few of Dave and Tim (Mud Bashing) that I'm sure that they wouldn't mind if I posted...
Dave - out in the bush
ratty 63 ·
Dave - rockhopping
ratty 63 ·
Tim - going up!
handycam ·
some nice pictures there
ratty 63 ·
Tim - ...and up!
ratty 63 ·
Dave - creek crossing
ratty 63 ·
Tim - Roo Tail!
ratty 63 ·
Dave - Sandhill
ratty 63 ·
Dave - proving once again why Bajas are superior to 4WD's 🙂
ratty 63 ·
Tim - at the Baja bash - over the hump
ratty 63 ·
Tim - at the Baja bash - through the mud hole
ratty 63 ·
the next series of 3 pics is of something that you won't see every day....and I know I will be killed for posting these but it just had to be done!
Pic 1 - Dave - go, go, go! Almost able to use the Porsche Fan as a propeller!
[Edited on 17-1-2005 by ratty 63]
Pic 1 - Dave - go, go, go! Almost able to use the Porsche Fan as a propeller!
[Edited on 17-1-2005 by ratty 63]
ratty 63 ·
pic 2 - Dave - now how do I get out without getting wet feet?
ratty 63 ·
pic 3 - Dave - having to admit defeat
I might just note that it took a few attempts for the 4WD to pull him out of there - the track (where the 4WD was) was very slippery!
I might just note that it took a few attempts for the 4WD to pull him out of there - the track (where the 4WD was) was very slippery!
ratty 63 ·
Dave - at the Baja Bash - over the hump
ratty 63 ·
Dave - at the Baja Bash - through the mud hole
ratty 63 ·
Last one for now...
I know that I am going to be killed for posting that last series of pics so I might as will finish myself off properly!
This was the result of the last pic - it was the only time all day that the car stopped and dispite having just landed in a giant mud puddle, it turned out to be a temp sensitive condensor that didn't like the sudden change from hot to cold that caused it to stop, not water in the dissy as many of us suspected.
I know that I am going to be killed for posting that last series of pics so I might as will finish myself off properly!
This was the result of the last pic - it was the only time all day that the car stopped and dispite having just landed in a giant mud puddle, it turned out to be a temp sensitive condensor that didn't like the sudden change from hot to cold that caused it to stop, not water in the dissy as many of us suspected.
ratty 63 ·
Hey Tim,
If you have your pics of your trip to Frazer back from the developers, I'm happy to scan and post them for you if you would like.... just drop them off to me anytime.
Cheers,
R 🙂
If you have your pics of your trip to Frazer back from the developers, I'm happy to scan and post them for you if you would like.... just drop them off to me anytime.
Cheers,
R 🙂
MUD BASHING ANYONE ?? ·
I would but i gave them to terry at custom offroad and i cant see them anywere so ill have to get dave to get them next time he sees him anyway them were some cool photos ill have a look for some more photos of dave stuck lets face it he dosnt come on here so lets pick on him. How is you bug going i just did 3/4 of the back section of my body lift and if all goes well ill finish it tommorow along with a template for the front and i think the box that i picked was a 1700 which is ment to be stronger but still low gears
Beaker ·
Wow. I've met some people around with bajas who claim to be off roaders then turn out to be pussies, you guys are the real deal!
ratty 63 ·
...I've lots more pics of Tim and Dave mucking about off road, but these were the most 'visually effective'. No point in having an off road vehicle if your not going to use it off the road! I have set a date to have mine finished - Easter...nothing is going to stop me now (...well, a lack of cash may slow me done but....)
My pan is going off to COR tomorrow to have the IRS conversion done (don't tell Dave or I will never hear the end of it!), and the body is heading to the bead blasters next week to blow holes everywhere....er....I mean strip the paint off :duh I currently have the body on its side so that I could get to a couple of pin holes in the sill on the drivers side - when I hit the area with the wire wheel, about 2 dozen other hole appeared....grrrrr. As you can also see, I have welded a 'new' arse end on the body so that I can cut it back off in a better location. The idea here is to try to shield the engine from flying rocks and stuff as much as possible
I'm busting to get this done - I want to see what all this money I have spent will create!!
Heres my Garage at the moment.... (angle parking?) :thumb
R 🙂
My pan is going off to COR tomorrow to have the IRS conversion done (don't tell Dave or I will never hear the end of it!), and the body is heading to the bead blasters next week to blow holes everywhere....er....I mean strip the paint off :duh I currently have the body on its side so that I could get to a couple of pin holes in the sill on the drivers side - when I hit the area with the wire wheel, about 2 dozen other hole appeared....grrrrr. As you can also see, I have welded a 'new' arse end on the body so that I can cut it back off in a better location. The idea here is to try to shield the engine from flying rocks and stuff as much as possible
I'm busting to get this done - I want to see what all this money I have spent will create!!
Heres my Garage at the moment.... (angle parking?) :thumb
R 🙂
Midlife crisis ·
great pics Ross.
Was that the Dave took Kath around the buggy bash and stopped?
I told Kath it was her fault it stopped has it never stopped all day until she got in the car LOL.
can't wait to see you buggy on the road
Marc
Was that the Dave took Kath around the buggy bash and stopped?
I told Kath it was her fault it stopped has it never stopped all day until she got in the car LOL.
can't wait to see you buggy on the road
Marc
ratty 63 ·
Yeah, that was the run that Dave did with Kath at the Buggy Bash! It wasn't Kaths fault :thumb, just a dodgy, heat sensitive, condensor which was replaced the following day - no further problems (relating to the condensor) since. Just unlucky I suppose!Midlife crisis wrote:great pics Ross.
Was that the Dave took Kath around the buggy bash and stopped?
I told Kath it was her fault it stopped has it never stopped all day until she got in the car LOL.
can't wait to see you buggy on the road
Marc
R 🙂
Midlife crisis ·
Just typical that Marc would blame me!!!!!!!!!! How are you Ross?
Kathy
Kathy
VWFREAK ·
very cool. There's some nice air time there aswell.
Beaker ·
I wish I was still in Brisbane, I'd be out with you guys in a second :thumb
Still, there's plenty of places here for me to go off road, just no other bajas to go with🙁
Still, there's plenty of places here for me to go off road, just no other bajas to go with🙁
DubCrazy ·
hey beaker speak to mattie182 on here he is in rocky and is aways gettin all the bajas and buggys togeather for some off road action.... he will be able to give you you fix i am sure :thumb
steff...................................
steff...................................
MUD BASHING ANYONE ?? ·
Hay come on ross thats not what we build offroaders for i would never think off getting my new baja dirty or the old one for that matter Ha ha ha ha ha now thats funny if there was anyone that wasnt scared of getting it out and dirty it would be me. so are you going to have it ready for fraser at easter if you are that means i should have mine ready cause were about the same stage by the pics and how much was the body blasting cost i want to get mine done to see how many holes they can blow in it
ratty 63 ·
Hi Kathy, I'm well thanks - how's you?
Tim, whats that about not getting your Baja dirty? I don't think I have ever seen it without a 'measurable depth' of mud stuck to it...in fact I'm not even sure that I would know what colour the paint is :P
I was quoted $450 to bead blast the body if I supplied it completely stripped...should take about a week...I will know more next week hopefully. I know that this process will open up more rust holes (better now than after I paint it), but I'm just a little concerned just how many and how big the holes will be 😠
I'm looking forward to seeing those pics from your Frazer trip - Dave tells me that there are some good ones in there....
I'm hoping that my Baja will be finished in time for Easter (when you are planning on heading to Frazer again), however I won't be able to come with you as I will have to run in the engine (something best NOT done on the sand), and I have already booked flights to Sydney to attend the Nationals....perhaps next time.
R 🙂
Tim, whats that about not getting your Baja dirty? I don't think I have ever seen it without a 'measurable depth' of mud stuck to it...in fact I'm not even sure that I would know what colour the paint is :P
I was quoted $450 to bead blast the body if I supplied it completely stripped...should take about a week...I will know more next week hopefully. I know that this process will open up more rust holes (better now than after I paint it), but I'm just a little concerned just how many and how big the holes will be 😠
I'm looking forward to seeing those pics from your Frazer trip - Dave tells me that there are some good ones in there....
I'm hoping that my Baja will be finished in time for Easter (when you are planning on heading to Frazer again), however I won't be able to come with you as I will have to run in the engine (something best NOT done on the sand), and I have already booked flights to Sydney to attend the Nationals....perhaps next time.
R 🙂
Boozer ·
I thought I'd resurrect this one again. I found these pics when I was cleaning up my computer I forgot I had. I've posted them before but that was at least 2 years ago.
11CAB ·
Hey Boozer, they might need an explanation......"My Uncles car...blah blah blah....." :thumb
Boozer ·
really? i'm just resizing it bigger...
Boozer ·
yeah they're my Dad's best mate's brothers' baja's. As far as I know they were the first to do the Simpson the wrong way in VW based vehicles. I might be doing a Simpson trip soon...:thumb
http://img.photobucket.com/albums/v260/Boozer62/boguns2.jpg
http://img.photobucket.com/albums/v260/Boozer62/boguns2.jpg
11CAB ·
When was that Lee?
I've bought a magazine article off Ebay about three manxes that did the Simpson trip in 1972......just waiting for in the arrive....should be a good read.
When are you doing the Simpson? Is it with KlubVW Offroad?
I've bought a magazine article off Ebay about three manxes that did the Simpson trip in 1972......just waiting for in the arrive....should be a good read.
When are you doing the Simpson? Is it with KlubVW Offroad?
Boozer ·
sometime in the 70's. I'm doing (hopefully, with my luck I'll miss out) it with some family friends.
BiX ·
johnyb from this forums car, with me behind the wheel
And its still going up!!!
And its still going up!!!
sgetty ·
hey theres a testie hangen outa that dudes shorts hahah
Boozer wrote:yeah they're my Dad's best mate's brothers' baja's. As far as I know they were the first to do the Simpson the wrong way in VW based vehicles. I might be doing a Simpson trip soon...:thumb
http://img.photobucket.com/albums/v260/Boozer62/boguns2.jpg
psychobuggers ·
Keep showing me these Baja day pics & I might just have to hold another one , I just recently spent another $2500 extending the track to cope with my cars knew powerplant.