hey this is in my 1600 twin port thats attached to my buggy. when i towed the thing the dizzy cap wasnt clicked down and fell off the little bastard...
so who knows which one i need!?
i havent taken it off yet and havent seen any markings detailing brand etc...
[Edited on 28-2-2005 by ~air fooled~]
[Edited on 28-2-2005 by ~air fooled~]
~air fooled~ ·
..
LOWBUG ·
YOU NEED TO ASK DAVE, HE'LL KNOW
68AutoBug ·
It should have the Bosch or VW part number written on it...
it looks like an early model dizzy with the condenser inside the dizzy.... although it does look New....
I wonder whether the 009 Cap will fit....
Looks the same size.....
Lee
[Edited on 28-2-2005 by 68AutoBug]
nbturbo ·
It's a Mallory distributor and takes a Mallory 225 cap.Should be able to get one at Repco or Autopro stores.
tassupervee ·
Yep
Mallory single point dizzy.
Also sold under the SCAT and a few other brands.
Nice thing is points for all Mallorys are usually the same and there are only 2 variations of the caps and rotors for 4,6 and 8 cyl dizzies.
There are plenty of electronic bits available for them as well.
Take your dizzy with you when you go so you get the correct type.
koolkarmakombi ·
I remember seeing one of those with a modded ponts plate that used an allen key headed fine thread bolt to adjust the points. Dial up dwell with an allen key!
kkk
~air fooled~ ·
hey thanks loads for the input fellas! i will pull it off soon and post more pics! thanks!:beer:beer:beer:kiss
tassupervee ·
As a matter of interest
I run the twin point version with mechanical advance (no Vac) only on my F-Vee.
It was given to me for nix!!!
The advance curves and amount of advance and soforth are easily adjustable.
L8tr
E
~air fooled~ ·
hey all, just got the cap yesterday, and the dizzy is indeed a mallory takin a 225 cap, well done guys and thanks for the help!:beer:beer