Hi guyz..VERY rusty late 56???(57) so need to get rid ov ASAP>>> 馃槈
sum parts there,,, in Brendale 4500 Brisbane....U2u me for details...
motor complete....seized...Thanxs George
Update.... transaxle available,,oval rear glass & vent section,dr hardware,windscreen,bits & peices...thanxs g馃槈list of parts & prices at the end of this thread馃槈
[Edited on 15/4/2005 by Crazy George]
[Edited on 26/4/2005 by Crazy George]
[Edited on 26/4/2005 by Crazy George]
kombibob 路
how much for the oval section?
KDFking 路
i would also be interested in the oval rear cut if kombi bob doesnt want it and the dash cut with pedals and semaphores and tailights and decklid........馃槈just send me a list of prices and your ph no and ill give you a call.i can cut out panels myself if that helps
Crazy George 路
have glass..rear.windcreen ok... windups...rear section there...started to cut out a littlerusty in glass section...
pedals there... hav allready cut pillars but have managed to remove complete with wiring loom...(all of it),,decklisd shagged but useable for repairs up top..etc,,tailights where missing,guards were chopped Car was driven to strady years ago by the one family..so rusty as!!!
Unity-28 路
CG has it got all the body bolt ons Guards and stuff? May be int in the front guards, and If the rears are the dimpled type, those as well. N
Crazy George 路
u2 u me please..
KDFking 路
ill call in the morning.thanks andreas
Crazy George 路
BUGBOY 路
you have u2u
555bug 路
hey George is that the one that was in the field over need the gateway? If it is you are a braver man than me 馃檪 not much left.
h 路
hey george what colour was that 55.. any pics worth showin?
amazer 路
I am after some interior pieces, namely the mesh behind speaker grill, and can you tell me if it has had a radio fitted or does it have the blank plate fitted.
I want my dash to look like this MMMMMMMMMMM.
Crazy George 路
update... Kombibob.. 1st dibs on Oval section
Nectar;;bolts are probably too rusty?? but will look 4 ya anyway.. Guards have been chopped & way too rusty..
KDFKing,,,1st dibs on pedal assembly,semaphores,dash,decklid,2nd dibs on oval section...
555;;Yes that wa it! scull dragged it out of paddock with trust 16v!!!馃槈
H:: original colour looks like dove grey.,but now painted -faded blue..
Amazer::dsh mesh, grille,block off etc.there . but if the above dont want it? then u have 1st dibs 馃槈
Bugboy::2nd dibs on pedal assembly..2nd dibs on dash..
Thanxs to all.. 馃檪
Crazy George 路
[Edited on 14/4/2005 by Crazy George]
[Edited on 14/4/2005 by Crazy George]
Crazy George 路
[Edited on 14/4/2005 by Crazy George]
Che Castro 路
Hi, is there a wiring loom or any of those original black bakelite fuse boxes? I'd be interested in those
Beerboy 路
wow! be interested in the steering wheel and the door catches and strikers, and any door hardware if it is pre 55.
bugeyedbabe 路
george, so glad this wasn't there when i last came to visit...would have been a trip to hosp I reckon with Ally & AJ shredded...
"hey mum, george, look at us bounce thru this floor!"
馃榾
Boozer 路
damn, if i saw this earlier i woulda used it for my baja.
billholmes 路
How sad is this.
Do you have a horn button or the fuel cap?
billholmes 路
Also do you have an ID plate.
U2U me.
billholmes 路
Plus. Do you have the accelerator Ball?
Gear knob?
I just wan't something oval to put on my 62'
Cheers Billholmes
Crazy George 路
che castro(Jon::Wirin loom & bakerlites!! YES>>>
Beerboy::Steering wheel off complete with column..(not sure might need the wheel 4 Izabel(my resto58)otherwisw will sell..
Bill Holmes:: YES,YES<& YES??? THe pedal assembly will need roller(ball)spoken for read above..
Gearknob non original melted rubber ball..
Again thanxs to all....
NOte,,, KDF kingwill b here in a littlewhile to help finish off..if i dont here from kombibob..He will get 1st option on rear cut & glass..馃槈
Beerboy 路
Ok thanks still be interest in the door hardware
vwtyp2 路
tail lights there?
any heart glass?
ruckus 路
Man now that's a rat!:thumb
billholmes 路
Interested in selling the ID plate
[Edited on 14/4/2005 by billholmes]
Che Castro 路
I'll also go in line for the steering column & wheel too
amazer 路
When does the timer run out. Can I have my speaker mesh yet? :thumb
Crazy George 路
Thats the tailights im reffering to.. 馃槈
[Edited on 15/4/2005 by Crazy George]
billholmes 路
$5 for the ID plate
Crazy George 路
Crazy George 路
Cheers to all so far... 馃槈
Crazy George 路
Cheers G
Crazy George 路
motor near complete...rusty bis but savageble..orginal carby Aircleaner fuelpump etc....Sell this $100....Early crash box(transaxle)$100....starter motor 6volt ..$40...rear oval glass...$80.. windcreen $55......semiphore pillars with semiphores ok conditon,with wiring $100...wipermotor(6volt)$35...dr mechanisms(hardware etc)both sides including catches $90....glovebox lid.$25...80mph orig speedo,,bit rusty...$20..bracket holds bonnet up(locking position)$15...,
thanxs g..
Crazy George 路
blk56 路
Interested in motor or parts
Crazy George 路
Crazy George 路
dr hardware ,, glass oval window.. motor, DAsh etc.. Cheers
Mr Bubble Head 路
I'm intrested in the wiper motor any pics pls
nIck
Crazy George 路
Crazy George 路
cheers g馃槈
Crazy George 路
Mr Bubble Head 路
Shit man make up your mind how much you want for this wiper motor
You advertized it for $35 then email me saying that you want at least $60.
Whats going on George?
FYI the only other wiper motors that go for big bucks are the one year only early 70 twin speed motors
I'm still happy to buy it from you but you carn't move the goals like that.
nIck
Crazy George 路
sorry nick.. my apologies... didnt realize i put a price on here... my mistake...... will send u u2u... cheers g..