Size of split kombi front nuts to get drum off

am I right in thinking that a split kombi wheel bearing / front hub nuts are 33mm. Need to get a spanner me thinks.

thanks

they should not be to tight i think there is a lock nut with a tab washer , tap the tab out of the way with a hammer and screw driver then undo the outer nut then the inner nut , its only holding a bearing together, or the tab is on the inside nut cant remember i wouldnt go buying a unusual size spanner like that if this is all you need it for , it might be a evil word but i think a shifter would be fine
just my 2c could be wrong
cheers darren

thanks mate