Need to overhaul a turbo (TD05) due to compressor nut backing off:repuke
Who do you recommend around Syd....and why?:thumb
1303Steve ·
Hi
Turbo logic in the gong are apparently good, he does work for Dave Stocker & Rod Penroses cars, he's helped me out with a few gaskets and advice. Its a bitch of a place to find the 1st time.
Steve
LOWBUG ·
Yeah I agree, I bought my turbo from Fred at Turbo Logic and found him great to deal with, dosen't treat you like a backyarder and dosen't mind a chat. He's down south near inner harbour Ph:42747555
He'll definatly get it boostin again.
speedster356 ·
Thanks I'll call and drop in on Friday.
cheers
vw54 ·
Down at the Gong ... He will be impressed with your road side running repairs LOL
speedster356 ·
Yeah on saturday practice I found that I had poor spooling and down on boost, finally on run 5 there was plenty of blue out the exhaust. Pulled the turbo down on Saturday night in the pits camping ground by torch light after a few beers. Found the compressor wheel nut had backed off, most likley as a result of a failed AFM at the round before last which gave me lots of back firing. We tightened the nut, dressed the compressor and exhaust wheels with a Stanley knife and small file, slapped it back together ,wound the boost up to compensate for the increased housing clearances and she ran like a dream!