SOLD. Superboot short drive shafts with Kombi CVs

For Sale: 2 Superboot heavy duty short drive shafts (these are needed if your doing a Kombi to Beetle trans swap) 4 Kombi CV joints and boots, all are very low mileage. Also included are 2 adaptor/spacer flanges, these bolt to type 1 drive flanges and allow the above axles and CVs to be used with stock Beetle stub axles. $400 ono. Call Steve on 0413 8111 86 or webmaster@clubvw.org.au Located in Sydney, post code 2210nn[ Edited on 28-7-2005 by 1303Steve ]

free bump ...

and does SB do fatter torsion bars?

Hi

Thanks for the bump. Im not sure but I bought some Sway away heavier bars from V Force.

Steve

1303Steve wrote:Hi

Thanks for the bump. Im not sure but I bought some Sway away heavier bars from V Force.

Steve

Thanks. I have seen SaWs and teh work great but would like to get local ones if I can... SB or LMS engineering or whatever...

Hi

Give LMS a call he knows how to get in touch with Superboot. If you dont have LMSs number U2 me.

These axles were on Dave Stockers Ghia, then my bug.

Steve

Bump

What splines Stevey?

Hi Daffyd

They are stock VW spline. I thinks thats 32.

Steve

what about a picture and if i may sound slightly stupid: what is the primary benifit of these over some modified type 4 ones (beetle one end, type four other end)?

Hi 555

The benefit of using Kombi CVs at both ends is the added strenght. These shafts and CVs came from Dave Stockers (LMS) Ghia, he ran a Kombi box in the Ghia, these are the correct lenght if you are going to use a Kombi box in a IRS bug, Ghia or Type 3.

When I fitted them into my bug I was using a Type 1 box, so the axles were too short, Dave made me some adapators/spacers that in affect lenghten the axle and allowed the Kombi CV to bolt to my Type 1 flanges on my gearbox.

I will take some photos tomorrow.

Steve