Has anyone got a web link for plans for a cradle to rock a bus on its side so that you can work on the underbelly easier?
I'm trying to convince the doctor that this is the way to go for his bus.
ruckus ·
Aussieveedubbers · General Chit Chat
Cradle for working under a Split?
https://forums.aussieveedubbers.com/threads/45002/cradle-for-working-under-a-split
Desert Bug ·
G'day ruckus<
It's the way to go, I looked into building a rotisserie but in the end just rolled it over onto some old tyres and never looked back. The only damage (I did this at least twice on each side) was a small bend to the rain gutter about 25mm long that straightened with a tap with a hammer.
Made doing the IRS conversion so much easier as well as undeneath repairs etc.
Cheers, Ian.
It's the way to go, I looked into building a rotisserie but in the end just rolled it over onto some old tyres and never looked back. The only damage (I did this at least twice on each side) was a small bend to the rain gutter about 25mm long that straightened with a tap with a hammer.
Made doing the IRS conversion so much easier as well as undeneath repairs etc.
Cheers, Ian.
nicko ·
Go on the samba and do a search under zimblewinder for his one. I am currnetly building one at the moment and it should be finished by the end of next week.
empi ·
I have the link to build rotissary.... somewhere.
Here tis Rob
http://members.aol.com/SoloHobbit/bustisserie.htm
Adamski
[ Edited on 21-10-2005 by empi ]
Here tis Rob
http://members.aol.com/SoloHobbit/bustisserie.htm
Adamski
[ Edited on 21-10-2005 by empi ]
ruckus ·
Thanks mate
nicko ·
beerdoc ·
Hey ruckus ,
If I can get under there too weld and grind you can get under there to clean it up:kiss
:beer
If I can get under there too weld and grind you can get under there to clean it up:kiss
:beer
nicko ·
I found some of the dimensions were out on the link I posted. I have almost finished building it and will post the dimensions I found to work
Nicko
Nicko