As the title says, im after a ragtop frame. no bits and poor condition is fine. not a problem.
let me know what u got
cheers
adz
Adam_C ·
Aussieveedubbers · Buying, Selling & Swapping Parts
Wanted. Ragtop frame. Clip only, no bits and peices.
https://forums.aussieveedubbers.com/threads/46459/wanted-ragtop-frame-clip-only-no-bits-and-peices
WABaja ·
Author: Subject: Britax ragtop to suit beetle [not Type 3]
killakornkobb
A.k.a.: Damien
Veteran Volks Folk
where's that clutch?
--------------------------------------------------------------------------------
Posts: 1247
Threads: 111
Registered: 28-3-2004
Member Is Offline
Location: Rowville, Melbourne
Theme: UltimaBB Pro Grey
Mood: corona sippin'
posted on 28-11-2005 at 19:10
Britax ragtop to suit beetle [not Type 3]
Seller: Damien Peiris
Location: Rowville, Vic
Item: britax ragtop
Cost: $400 ono
taken out of a '69 1500..
headliner inside was shagged mnost of it's still there the vynal for the outside is removed.. but still in one piece.. and ratty.. would need to be re-covered... unless its going in a rat.. then it's perfect
the inside frame, that holds it in from the inside has broken in one corner.. still holds everything in place as it should but if you want, i can get it welded up/resprayed prior to purchase.
need to raise some funds, so i can continue to do bits and pieces to adolf, while still helping the girlfriend with her course
killakornkobb
A.k.a.: Damien
Veteran Volks Folk
where's that clutch?
--------------------------------------------------------------------------------
Posts: 1247
Threads: 111
Registered: 28-3-2004
Member Is Offline
Location: Rowville, Melbourne
Theme: UltimaBB Pro Grey
Mood: corona sippin'
posted on 28-11-2005 at 19:10
Britax ragtop to suit beetle [not Type 3]
Seller: Damien Peiris
Location: Rowville, Vic
Item: britax ragtop
Cost: $400 ono
taken out of a '69 1500..
headliner inside was shagged mnost of it's still there the vynal for the outside is removed.. but still in one piece.. and ratty.. would need to be re-covered... unless its going in a rat.. then it's perfect
the inside frame, that holds it in from the inside has broken in one corner.. still holds everything in place as it should but if you want, i can get it welded up/resprayed prior to purchase.
need to raise some funds, so i can continue to do bits and pieces to adolf, while still helping the girlfriend with her course
Adam_C ·
Read that, but at 400..... and it is complete. i dont need as complete one. just the frame for it .
VOLX ·
i think i might have what you need you can call me during the day on 0407316755 my name is jayden.
Unity-28 ·
If adam_c isnt interested, I might be.....If its a Golde section.
Thanks Nectar.
Thanks Nectar.
Adam_C ·
will call you tomorrow, only just got the peice then
Nice meetin ya nectar, will let u know what happens here
Nice meetin ya nectar, will let u know what happens here
Unity-28 ·
You too man....Spewin I couldnt hang around longer....Adam_C wrote:will call you tomorrow, only just got the peice then
Nice meetin ya nectar, will let u know what happens here
No stress about the clip....when ever man.
N!
VWFOOL ·
another wog under the thumb nectar?
Adam_C ·
Nectar, its just the ragtop parts and not the clip. the opposite to what i want. so go for it
Unity-28 ·
Nah, went past the 356 day....plus xmas shopping.VWFOOL wrote:another wog under the thumb nectar?
Unity-28 ·
I want a clip as well....I have two sets of parts, with only one rag (that is in the car)Adam_C wrote:Nectar, its just the ragtop parts and not the clip. the opposite to what i want. so go for it
N!
XXX-1.8T ·
N! is a legend hopefully we meet up again next DOVW, BTW what are we going to do about our green team re 😉