Did you tell us what you were doing yet?
good luck.
First day always means alot when i give someone a start, but its the second third and forth days you see what they are made of!
hellbugged ·
Aussieveedubbers · General Chit Chat
Its MY turn to start work tomorrow!!!!!!!!!
https://forums.aussieveedubbers.com/threads/48458/its-my-turn-to-start-work-tomorrow
Brad ·
Vehicle Builder ??, where at ?
tinman ·
Yeah sounds interesting, any more info for us?
Hey good luck with the new job man.
I was watching an episode of Monster Garage today. Jesse and the crew built a 51 split oval for the drag strip. You should have seen the state of this split oval before they got stuck into it. The thing came out of a swamp!
Jesse arrived in a mint condition 66 beetle and later rocked up in a black notch he sourced from Australia. Both looked real nice from the little you could see of them. Apparently his always really been into VW's.
Ops, sorry got side tracked talking about a differant topic in someone elses thread.
Sorry about that.
[ Edited on 29-1-2006 by tinman ]
Hey good luck with the new job man.
I was watching an episode of Monster Garage today. Jesse and the crew built a 51 split oval for the drag strip. You should have seen the state of this split oval before they got stuck into it. The thing came out of a swamp!
Jesse arrived in a mint condition 66 beetle and later rocked up in a black notch he sourced from Australia. Both looked real nice from the little you could see of them. Apparently his always really been into VW's.
Ops, sorry got side tracked talking about a differant topic in someone elses thread.
Sorry about that.
[ Edited on 29-1-2006 by tinman ]
bajachris88 ·
goodluck mate.
Bet we are in for a treat when we see ur vehicle buildin' skills on ur supa bug.
still at QR?
Bet we are in for a treat when we see ur vehicle buildin' skills on ur supa bug.
still at QR?
helbus ·
Is it an apprenticeship you are doing?
Vehicle body builder? Coach builder? Sheetmetal fabrication? Busses, Cars, Hearses, Limo's, Truck cabins? Which type, sounds like an interesting job.
Vehicle body builder? Coach builder? Sheetmetal fabrication? Busses, Cars, Hearses, Limo's, Truck cabins? Which type, sounds like an interesting job.
Midlife crisis ·
good luck
hellbugged ·
Maybe he is busy updating his thread about his epileptic dog, or driving mummies car or.........Helbus wrote:Is it an apprenticeship you are doing?
Vehicle body builder? Coach builder? Sheetmetal fabrication? Busses, Cars, Hearses, Limo's, Truck cabins? Which type, sounds like an interesting job.
bajachris88 ·
maybe busy working today? 😂
helbus ·
I can see it now. About 5.30pm today when 1stcarbug gets home from work. A barrage of replies to keep up the daily average. We'll see I suppose. 😏 or :duh
Stanley ·
Good luck man...
Hey newbie...get me a left handed screw driver...😂
Hey newbie...get me a left handed screw driver...😂
penguin ·
From what he's said its a vehicle builder job at Qld Rail, so its just up the road from his place and should be good for him to do. From what i have seen he's got stacks of work needed on the Super, so its a good source of VW/beer credits.
Good luck at it.
Good luck at it.
bajachris88 ·
phh, Lol, left hand screw driver. I need one of those 😂
Yeah, tis Qld rail, said he may also be working on the diesel trains too i think at one stage during a MSN convo. Be fixing up there company cars too i would imagine. Sounds like a pretty chnazzy job.
Yeah, tis Qld rail, said he may also be working on the diesel trains too i think at one stage during a MSN convo. Be fixing up there company cars too i would imagine. Sounds like a pretty chnazzy job.
helbus ·
chnazzy? that's a new one for me. I'm gonna have to use that one. 🙂bajachris88 wrote:Sounds like a pretty chnazzy job.
That would be a good job on trains. Hard work and (hopefully) good pay. Experience and maybe use of workshop facilities.
Good on ya 1stcarbug.:thumb
helbus ·
There are actually metric shifters and also left hand shifters available. - Believe it or not 🙂bajachris88 wrote:phh, Lol, left hand screw driver. I need one of those 😂
1500S ·
Show us a picture of the left hand variety and then we'll believe it! Untill then it's just folklore!
Hope the "new apprentice" doesn't believe any of the things about the left handed variety shifters or screwdrivers in the explanation below! Mertic shifters....yeh right! The hand of the worm doesn't "hand" the tool. However, one thing that IS made in a left hand variety is a twist drill. Sure gets the brain active when it needs sharpening! Not in general use though.
Don't confuse the boy!
[ Edited on 30/1/2006 by 1500S ]
Hope the "new apprentice" doesn't believe any of the things about the left handed variety shifters or screwdrivers in the explanation below! Mertic shifters....yeh right! The hand of the worm doesn't "hand" the tool. However, one thing that IS made in a left hand variety is a twist drill. Sure gets the brain active when it needs sharpening! Not in general use though.
Don't confuse the boy!
[ Edited on 30/1/2006 by 1500S ]
helbus ·
No pic required. It is left hand thread on the winder bit. That means if you have a Sidchrome or Kinchrome shifter and wind the adjuster it will go one way.
If you hold a Bahco or Irega shifter the same way and wind the adjuster the same way as the Sidchrome, it will move the opposite direction.
If you hold a Bahco or Irega shifter the same way and wind the adjuster the same way as the Sidchrome, it will move the opposite direction.
pod ·
how about getting us some striped paint🤪
hellbugged ·
1stcarbug wrote:its great, post count average will have 2 do with a down turn cos i have a life again, and my epeleptic dog would kill u if u picked on him:cussing mums car is a heavy un chuckable shit heap😬 and i love my job, but i wouldnt mind goin 2 get a long weight....😂
oops, sorry dude, i forgot to put in a couple of faces to signify it was just in good fun. i'll try again:kiss
hellbugged ·
dumone wrote:Maybe he is busy updating his thread about his epileptic dog, or driving mummies car or.........:P:P:P:P:PHelbus wrote:Is it an apprenticeship you are doing?
Vehicle body builder? Coach builder? Sheetmetal fabrication? Busses, Cars, Hearses, Limo's, Truck cabins? Which type, sounds like an interesting job.
:bounce:thumb:P:bounce:thumb:P:bounce:thumb:P:bounce:thumb
MickH ·
Don't forget the non slip grease and a ratchet hammer...1stcarbug wrote:its great, post count average will have 2 do with a down turn cos i have a life again, and my epeleptic dog would kill u if u picked on him:cussing mums car is a heavy un chuckable shit heap😬 and i love my job, but i wouldnt mind goin 2 get a long weight....😂
Special Air Service ·
And woodcraft welding rods for welding wood
1500S ·
For the "new apprentice". See previous added post re left handed spanners etc!
Hope he enjoys the start of his career and that it helps in maintaining the beloved VW.
Hope he enjoys the start of his career and that it helps in maintaining the beloved VW.
pod ·
what about left handed taps,for left hand threads🤪
shaihulud ·
Back in the Dark Ages when I was the newbie in an International Harvester workshop I was sent to the parts store for a tin of red and white striped paint. I got a big tin of white paint and a small tin of red paint. I carefully dribbled a swirl of red paint into the top of the can of white paint, resealed it and carried it very carefully back to the workshop where I presented it to the formman. They never tried anything like that on me again
1500S ·
--what about left handed taps,for left hand threads--
Didn't think you had to be left handed to use these!
Left handed threads are used on one side wheel studs a number of veichles including Aston Martin (1/2" UNF LH) as well as many items of machinery including bench/floor grinders.
As for the old Apprentice gags, new apprentices at Eveleigh Loco Works (Redfern) were sent with a wheelbarrow to pick or the "Davey Press". It weighed around 50 tons! But that was 40 odd years ago when we had industry in Australia!
[ Edited on 30/1/2006 by 1500S ]
Didn't think you had to be left handed to use these!
Left handed threads are used on one side wheel studs a number of veichles including Aston Martin (1/2" UNF LH) as well as many items of machinery including bench/floor grinders.
As for the old Apprentice gags, new apprentices at Eveleigh Loco Works (Redfern) were sent with a wheelbarrow to pick or the "Davey Press". It weighed around 50 tons! But that was 40 odd years ago when we had industry in Australia!
[ Edited on 30/1/2006 by 1500S ]