Aussieveedubbers · General Chit Chat

Engineering Shop Wanted

https://forums.aussieveedubbers.com/threads/50073/engineering-shop-wanted

Beerboy · 21 Mar 2006, 12:29 pm

I need someone with a hydralic press to get the balljoints out of my trailing arms off a kombi and new ones back in again, i am also looking to getting the colars reamed by about 7mm. anyone point me to an engineering shop

Anyone know anywhere around parramatta or leichardt.
or anywhere between those two. As I work and live at the other

vw54 · 22 Mar 2006, 7:16 am

Vintage at Campsie can do the pressing for you 9789-1777

glider69 · 22 Mar 2006, 8:48 am

definite dimension engineering
13/29 helles ave
moorebank 2170
98228374

you know where it is lloyd

1500S · 22 Mar 2006, 10:05 am

Send me U2U and I'll give you a phone number to call me. Located at Meadowbank just down the road and may be able to help.

DH

Beerboy · 22 Mar 2006, 6:21 pm

many thanks for all the replies, meadow bank by bike might be easiest ;-)

many thanks

1500S · 22 Mar 2006, 8:59 pm

U2U sent. Give me a call tomorrow sometime 8 am to 4.30 pm.

DH

Craig Torrens · 22 Mar 2006, 9:18 pm

glider69 wrote:definite dimension engineering
13/29 helles ave
moorebank 2170
98228374

you know where it is lloyd

yep, guy place to go.

Beerboy · 22 Mar 2006, 10:29 pm

certainly is just a bit too far with kombi ball joints on my back on a pushy ;-)