I have a heap of Kombi's and kombi parts that I am looking to move onto a new home. I have at least 10 vans in various states from driving and almost RWC to no just rolling shells.
Post your questions on here and I will provide pics and descriptions. Happy to send anything or pickup can be arranged from Stafford once parts are paid for..
Payment for parts is Direct Transfer prior to pulling and I am happy to refund if the parts don't match the description I give. I will not be pulling parts if they are not paid for. Same goes for the shells and vans, not interested in tyre kickers, if I have it and you want it I will sell it. If you don't know what you want and you just want a look then admission is $1000 and you get a free van when you leave.
If you want rolling shells and the likes I am happy to deliver as part of any deal made.
Prices - starts from free and go up from there:
Rolling Vans
79 Double Door - Needs complete rebuild, rolling shell, has doors, dash etc no motor or gearbox - $50
72 Panel Van with windows on one side, no motors, complete apart from that, was driving well when parked, has towbar, NO RUST, green in colour - $500
76 Camper - Complete interior, pop top broken, Auto, full width bed, swivel table, good cushions, Auto box still there, engine gone, front door gone, slider gone. Interior is in good nick - $350
76 Pop Top - 2L Engine, runs well, needs a Lower Ball joint for RWC, some scraps and dings, drives well ready for work. Has no interior in rear, 1800 transmission, test drive welcome, white in colour - $1000
76 Van - Great Body, no rust or dings, sitting in primer, 16" mags, awesome project ready for an EJ and a coat of colour after some cleaning as it has been sitting quite a while - $1000 firm
Mixed Kombi's - 76 Micro, 75 Van, few others of mixed years, prices from $50.
Parts
Roof Mount Kombi A/C Complete with instructions - $600
Rear seat for microbus with clamps - $150
Middle seat with clamps - $150
Rear seat fully retrimed with clamps - $250 ( grey and black)
NEW Kombi Camper Interior, great quality ready to bolt in with sink and fridge - $850 - No Stove or gas regulator.
16" 5 spoke mags with low profile tyres, ready to bolt on - $650
Mesh screen for kombi - $25
Doors, interior parts, trim, wheel, front ends, rear ends.. etc etc etc .
I am looking to make some space here and am keen to move some of this stuff on to people who can use it. I will provide as many pictures and as much info as possible.
I have NO 2L Transmissions for sale.
Post your questions here……
[ Edited on 12-5-2006 by Buggy Brad ]
Brad ·
[ Edited on 12-5-2006 by Buggy Brad ]
[ Edited on 12-5-2006 by Buggy Brad ]
hallph ·
Pics of the mags?
waltermitty ·
Brad how about a set of matching door locks and ignition< for three doors? Well its worth the ark. also would like a steering box that is better than ordinary ,as i have an ordinary one. I am also chacing a perfect bulkhead top pad from a non walk through . let me know . mitchell
mangrovejack ·
hi brad ,do u have a 2ltr crank and rods floating about? cheers jack.
Brad ·
Pics of mags when I get home tommorrow night.
Door locks - sent you an email
2L cranks and rods ..... should have but they are in a 2L bottom end. $150 for the lot and I will even drop it off the back as I drive past your hpuse every day ...
Brad ·
Pics of New Interior
Stove is not included as it is now fitted in the T25
[ Edited on 12-5-2006 by Buggy Brad ]
davidmaleny ·
Hi Brad, haven't taken the rear out of the type 3 yet - interested in some $ instead ??? Good luck with the kombi's - nice prices. David
bugbrained ·
hey brad after towbar for a 76 kombi camper
Brad ·
David - No rush ...
Towbar ... yep will have a towbar . $65 with tongue and ball
Wag67 ·
can you post a pic of the rear seats. interested in the middle one but will consider both
cheers
Brad ·
Will post pics sunday. They look like Kombi seats .. no rips good conition from memory
_dmb_ ·
do you have a decent pair of 2 litre heads??
cheers
Brad ·
mm dunno .. I have some on dead engines but who knows if they are descent. Would not sell them with confidence but I would say no ..
jb4845 ·
Hey Brad
I need some rust-free donor floor sections for my 69 Kombi resto
I need two sections around the floor mounting plates for the middle seat, and probably two bits where the seat belts mount
PLease let me know if you have any vans that you are prepared to cut up, and what the dollars will be
Need them soon as the van is in for rust repairs now
Thanks, Josh
ColumBUS ·
hey brad,
im looking for some interior panels for my 74 panelvan, you got anything for me?
regards,
Danielfish
hallph ·
Do you have a left hand mat that fits under the seats?
Mine is ripped so I am after a replacement, they are $140 new for a set but that is a bit much to pay seeing as I only require the one.
🙂
Beerboy ·
any chance of a early bay drivers side rear corner if you are cutting one up thanks
Dozza ·
Hi Brad....
Have you got any sliding windows??
Cheers
Dozza
kombibob ·
Hey Brad
I'm after a full set of hood lining bows for the subibus
if you have some let me know how much
thanks
Bob
Volkswagenboy ·
E-mail sent.
-Staggers.
Craig Torrens ·
Brad, 1800 cranks and rods. Cheers
SVNWGN ·
Hi Brad
Im chasing the accelerator pedal and linkages for a 75 Kombi
Also maybe interested in some front seats if you have any
Thanks
Allan
Brad ·
Jb4845 – yep I have some of them, or at least I can cut some for you - $100 plus postage
ColumBUS – I have some rear trim, nothing from a panel as they didn’t come with them. I would have trim from non panels as far as rear trims and door trims – Let me know which ones you want.
Hallph – I will have a look, most seem to get tossed, if I do have one that is worth posting you can have it for $10 plus postage. Will check today and take pics
Beerboy – No early bays at all. Lge tail light only
Dozza – No rear sliders, I have some aftermarket louvers but no sliders.
Kombibob – I will have a look, ring Dan he had set from last time he was gunna do the subie bus.
Craig – I have an 1800 engine for you …. When you gunna pick it up ??
SVNWGN – yep I have linkages for a 75, they are Z pin style , yeah ?? is so complete assembly – Pedal, linkages, pins etc $20. Seats .. front bay I will take some pics of what I have.
Brad ·
Mag Wheels with 205 / 55 / 16 tyres at about 70% on them, 4 of em al matching with air brushing as shown.
rear kombi trim, don't think I have any matching panels and the vinyl has fallen of passengers side rear panel.
Kombi rear seat - have a few oth these, all look the same
Kombi roof lining, complete, no rips but does need a clean.
Brad ·
Hallph pics for you .... it is in good nick, has a few small holes where the seat sits on it.
kombibob ·
hey brad could you u2u me dans ph number or email address?
can't seem to find them.
thanks
bob
SVNWGN ·
That is the accelerator assembly I am after, how can I go about paying for& collecting from you??
Also, is it possible to get pictures of the air conditioner you have and is it everything that is needed to fit air con or will other parts need to be sourced?
Thanks
$2.63 homebrand baja ·
hey brad I am after the headlining, and interior panels for 74 kombi so if no one has already grabbed them, can I pop in and give you the money this week? (don't care about falling off vinyl or mould 😉 ) also do you have the card/panel bit that goes in front of pedals etc..
Dozza ·
any seatbelts in reasonable condition.....
Need a full set for the raer of a microbus
[ Edited on 14-5-2006 by Dozza ]
Brad ·
Buggy Brad wrote:Payment for parts is Direct Transfer prior to pulling and I am happy to refund if the parts don't match the description I give. I will not be pulling parts if they are not paid for.
[ Edited on 12-5-2006 by Buggy Brad ]
If you want it let me know and I will send you the bank details.
Seat belts - Full set or rear seatbelts for microbus in RWC condition ( 6 belts in total. 3 lap / sash and 3 lap )with bolts ready to go $120
Air Con - it is a complete head unit. To use it you would need to sort out your own compressor. I do have a big ass condensor and frame that was under the bus that is with it. Also have the old lines and stuff but I wouldn't use them. I will get some pics
Brad ·
Look like I am going away for the next week or so. Should still have some net access so can answer ??? but no pics.
SVNWGN ·
I will get the accelerator pedal and linkages off you, just let me know details of where to send money to you.
Is it possible to look at the air con unit when I come to pick up the pedal assembly?
I wont be able to pick up for a few weeks but I am more than happy to make payment in the next few days.
brad,
im keen for all interior panels bar the roof lining. name a price.
hanktheplank ·
Brad,
Will those sliders in the pic fit a 76? If so, I am keen....I also need solid windows for the middle (slider and opposite) for a 76.
Also, I am looking for solid windows (without vents) for the left and right rear.
Let me know if the windows will fit and if they are in good nic and we'll get it sorted....
Cheers,
Ron
Brad ·
The slider in the pic is in the going complete camper and I am not intending on spliting complete buses. It is not a factory slider.
I have the solid glass - $30 a piece.
Heather - $100 for the roof and inside trim, don't have a slider piece in there but may have some elsewhere will have a look.
ColumBUS - Will see if I have another set, I have lots of loose ones but don't know about a complete set.
Brad ·
anymore takers
76camper ·
you got u2u, if not im after a t4 dizzy
airlekombi ·
mate - I'm after a cheap 1600 for kombi - you say you have 2 litre - will it fit ok?
Brad ·
what year kombi is it ?
The only good 2L I have is in a 76 Bus and am not splitting
No good 1600 4 sale
$2.63 homebrand baja ·
hey brad, looks like I may not need the interior panels/lining, had a stroke of luck this evening whereby I have been given a complete kombi in sydney for nothing (cept the tow cost) 😵💫
76camper ·
hey got any of these inc belt and hardware?
greenbus ·
Hey Brad,
Do you have a pair of 68-71 rear spring plates?
Thanks...Elton
Brad ·
Seat belt brackets will have to check I sold the three prs I had out but I think one bus up the back may still have them. Will let you know next week.
68 - 71 rear spring plates ..... any idea what the difference is ??
MikeM ·
Have you Got a early lowlight bay window front grill?
matthew74 ·
Hi, Need a 2LT gearbox . Do you have one?
If so how much and where do I pick up from?
thanks Matthew
Schmoburger2 ·
He already mention that he doesnt have any 2L gearboxes Matt...
Brad.... do ya happen to have a bullbar to fit a '76... preferably one of the simple tubular ones that were on Trakka campers? 🙂
Also...might possibly be interested in the auto box in that '76 if its in reasonable order and if it can be seperated. 👍
Oh also... the 75 van you mentioned... is that the white one in the back on the right?....got any other pics...of the vans themselves that is? 🙂
[ Edited on 21-5-2006 by Schmoburger2 ]
hallph ·
I'll send you a U2U regarding the under-seat mat shortly..
Do you have any indicator mechanisms with arms that are in good condition? Mine is missing some parts so it doesn't cancel automatically when driving, but the arm is in great condition still with all the original markings on it. I managed to find a replacement unit but the arm is in poor condition and I don't think its possible for me to swap just the arms over.
Cheers,
Phil
Volkswagenboy ·
He doesn't read U2U's I don't think.
-Staggers.
76camper ·
let me know how you go with the seatbelts and t4 dizzy.
Hey Brad Im looking for a rolling microbus to restore, preferably running? what have you got available? Would also like one with all parts still with it, like the interior.
Thanks Adam
Brad ·
I have a 76 rolling microbus and should have most if not all of the interior. Some of it needs love but hey what do you expect.
It has no motor or transmission with it. Condition is ok, not to many dings and hits that I recall. I will get some photos of it.
I have a few others but they are not correct microbuses, by this they are not plated as microbuses.
I have the 79 Double Door which is a microbus ,,, $50 :>
preacherman ·
Brad I am chasing a couple of 1800 heads........any chance?? What is the 79 double door like please
Brad ·
79 Double door has its own thread now in cars for sale.
I don't have anything in the way of descent Type 4 heads.
The 2L Auto in the rolling 76 is condition unknown. You want to pull it out you can have it for a carton of VB.
I will get some more pics of some of the rolling vans when I get home during day light hours one of these days.
KruizinKombi ·
I'm after the floor console for the auto selector and a set of driveshafts to suit a 2L auto....
Schmoburger ·
Brad..... are you able to arrange delivery of a rolling van to the NSW South coast (Jervis Bay), and if so...got any idea what that would cost? 🙂
Also...how bout tubular bullbars... ya got one? :beer
as for the auto box... if you are able to pull it and have it shipped down I may be interested if it has a torque converter, linkages and shifter with it... if its too much trouble tho.. never mind. 👍
Cheers mate
vwtyp2 ·
Looking for a T3 auto trans.
I know all the stuff you have here is T2, but if you don't ask, you don't find out.
77bay ·
Hey Brad, just got home from work and saw the 79DD is sold. I didn't get to reply until now. I guess that means you're not bringing it to Bribie for me? Buger, what else have you got that's not over the top rust wise?
Brad ·
Hi,
I am not pulling the Auto out but you are welocme to come and do it.
Colin you can have what you are after for $100
I am guessing a rolling van would cost $500 to Jervis Bay dunno though I have never sent one. You would be better off buying the 76 Pop Top for $1000 and driving her back.
79 DD is gone at least I have a guy who is puicking it up this weekend if he doesn't show then you can have dibs on it.
I have a 76 Microbus which is worth saving, pretty good rust wise. Less work than the DD. Can prob find an interior for it, I will find some pics and post them.
No T3 stuff
KruizinKombi ·
I'll pass, thanks anyway...
Brad ·
KruizinKombi wrote:I'll pass, thanks anyway...
No probs
Schmoburger ·
thanks Brad....no worries! 🙂.... just thought I'd ask anywho... only way to find anything out. 👍
So i'd assume none of the buses have a bullbar?
Brad ·
Schmoburger wrote:thanks Brad....no worries! 🙂.... just thought I'd ask anywho... only way to find anything out. 👍
So i'd assume none of the buses have a bullbar?
mm I have this one that I know of, solid but bent as shown.
Price : $1
[ Edited on 24-5-2006 by Buggy Brad ]
project_5 ·
i see the dd sold but spoke to the boss and piqued her interest in a bus so look forward to any pics or reccomendations after the same as "77bay" not too rusty and fairly complete interior wise will learn as i go
the boss has put a $500 budget to me so if you can help great
rather not a camper or poptop
if i dont ask i might miss out
thanx again
Jason
Brad ·
ok ..
76 factory Microbus, minimal rust, needs some paint, rolling, should have most parts. No motor or box. $350
[ Edited on 24-5-2006 by Buggy Brad ]
kombibob ·
would you deliver to arana hills for that price?
[ Edited on 24-5-06 by kombibob ]
Brad ·
deliver what ??
kombibob ·
the 76 micro
Brad ·
mm chuck in a carton of VB and yep .. oh it doesn;t come with the 30 15 x 8 ROH bands either :>
kombibob ·
cool i'll cheak with phatratpat to see if i can store it there .he he
and let you know
Brad ·
no probs you can store it here once you buy it :>
Brad ·
and if you buy in the next 1/2 hour I will throw in 6 mths of free storage at our brisbane site 👍
hallph ·
Think you may have missed my post. Do you have any indicator mechanisms? (see previous post)
Brad ·
I do but most but I am pretty sure they are all like your swith the plastic clips for return to centre broken off.
I had two good ones but they sold pretty quick.
I will check for you and let you know
project_5 ·
if you have a carbon copy of the 76 ill take it for that sort of money looks good thats if "kombibob" doesnt want
but is definatly what im looking for will pick up as soon as needed if you prefer and dollars can go over to you as soon as you wish
thanx
Jason
Brad ·
Jason,
If you want it you can have it... Bob has enough kombi's
Brad ·
76 Sold pending payment
Hey Bob - check ya email
kombibob ·
thats cool brad not sure what i wanted it for anyway
just had a few beers and thought mmm might buy a kombi?.. he he
Brad ·
Don't worry Bob I have plenty more for ya next time ya drunk :>
guru ·
How many $ for a pair of 15x8 bands?
phatratpat ·
kombibob wrote:cool i'll cheak with phatratpat to see if i can store it there .he he
and let you know
:thumbI WOODA SAID YEP ! ! !:cry
Brad ·
15 x 8 ROH bands $35 ea
megalania ·
Hey Brad, you got any rock n roll bed frames in any of those old busses up there? and perhaps some rear ser belts from a camper? if so how much?
bugbrained ·
brad just checking if you got my u2u regarding payment for mags
jeff
madcamper ·
Hi Brad,
Am interested in the white pop top with 2L. Has it got any major oil leaks? What condition is the body like? (Pics??)
kombibob ·
hey brad
i rang dan a week late
he through the hood lining bows away last weekend
so if you have some im keen, let me know how much.
thanks
bob
[ Edited on 2-6-06 by kombibob ]
hallph ·
Buggy Brad wrote:I do but most but I am pretty sure they are all like your swith the plastic clips for return to centre broken off.
I had two good ones but they sold pretty quick.
I will check for you and let you know
Thanks for that - I have not forgotten about the rubber mat that goes under the passenger seat, I just have been a little busy to organise it.
tomeatsrats ·
hey brad,
Just wonderin if u could show me a pic of your cheapest rear seat with mountin brakets + price?
Steve
SVNWGN ·
Buggy Brad wrote:SVNWGN – yep I have linkages for a 75, they are Z pin style , yeah ?? is so complete assembly – Pedal, linkages, pins etc $20. Seats .. front bay I will take some pics of what I have.
Hi Brad, Just chasing up the accelerator assembly etc. can you email me your account details to asmclean@optusnet.com.au so I can make payment to you.
Also how much for postage to Calamvale.
Thanks
76camper ·
brad, bump for the 3 dizzy's incase my emails arent getting through...
obegil ·
Hi Brad,
Have you got a steering box in good condition amongst all your gear??
Cheers,
Allan
72TWINCAB ·
Brad, I'm after a 74 on petrol tank. You have anything?
Bill
vwtrev1 ·
Brad, Do you have one passenger seatbelt for a late bay in good condition.
Also looking for a good condition late bay steering box I'm told ones in good nick are hard to find.
Please e-mail me on
seems like im not the only one trying to contact brad. Does anyone on the forum see him in person or live nearby who could possibly give him a tap on the shoulder for us who are after some parts...
Edward
72TWINCAB ·
Where are you Brad???????????????
76camper ·
i got a reply yesterday from him, he told me he is getting ready to away, in 4 days time. Seems like hes super busy, so it looks like this thread should be paused or something till he comes back...