may be of use for spares may be
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=2410865993&category=
馃檪
sand kombi 路
Aussieveedubbers 路 General Chit Chat
56 oval(in bits) on E-BAY
https://forums.aussieveedubbers.com/threads/5225/56-ovalin-bits-on-e-bay
OvalGlen 路
will be interesting to see if goes up
Robo 路
What dose severe rust in door channels mean! and is this common as he states?
strex 路
I think that guy was at the Swap Meet at Richmond .. If so the deck lid is half rusted away!
mattie 路
yes rust in the door chanels is common my 57 has gone.
but you can buy a new piece to fit in
but you can buy a new piece to fit in
silver 路
Ok experts how much do you reckon it's worth?
i'm in for $500...
i'm in for $500...
3toes 路
Strip back to bare metal, weld and quality sprayjob. $4-5k
Engine. $1k for a basic rebuild. Could spend way more.
Decklid. $300
2 bumpers $300
Windscreen $150
Brakes and suspension will probably need a rebuild if the rest of the car is that bad.
$1k maybe.
Full interior retrim. $1500
Thats about $8000 withou even trying yet for a car that probably wouldn't fetch more than 5k when complete.
There just isn't any substitute for buying a good car in the first place unless you have a lot of very talented friends who will work for beer and pizza.
Just my opinion obviously.
Chris
Engine. $1k for a basic rebuild. Could spend way more.
Decklid. $300
2 bumpers $300
Windscreen $150
Brakes and suspension will probably need a rebuild if the rest of the car is that bad.
$1k maybe.
Full interior retrim. $1500
Thats about $8000 withou even trying yet for a car that probably wouldn't fetch more than 5k when complete.
There just isn't any substitute for buying a good car in the first place unless you have a lot of very talented friends who will work for beer and pizza.
Just my opinion obviously.
Chris
blownKombi 路
Tell him he's dreaming