see my new thread \'type 3 parts for sale.\'

Seller's Name – Kai
Suburb / Post Code – Avalon NSW 2107
Item Description including Brand – see below
Condition – see below
Item Cost - see below

i no longer have the time, space or money for this project.
i would prefer to sell as a job lot. but if i have no interest within a week or two i will part the car out.

the car itself is currently dismantled and not running.
there are some rust issues, mainly at the bottom of the rear wings just behind the doors. i have previously had the sills repaired (they still need more work) and the front wings repaired.

the engine is a later model 1600 with fuel injection, it has a microtec computer and was running when i took the car off the road.

the whole braking system was replaced/upgraded by cbb, with new discs and calipers on the front, a rear disc conversion, and a new master cylinder. it's all setup for late model 4 stud wheels.

all the glass is there, i have a number of brand new seals (i'll list them a.s.a.p.)

i have a pair of rust free doors, a rust free bonnet and a rust free front valance (complete front panel)

more parts than you could shake a bloody big stick at!

seperate to the vehicle i also have:

a set of alloy wheels with brand new yokohama rubber
&
a 1.8 litre type 4 motor, was running when i bought it, i've since taken off the carbs and most of the tinware.

if someone is interested in taking the whole lot off my hands i'm open to offers above $1000 (edited)

the wheels with tyres and nuts/botls will be $sold (the tyres alone cost that much)

the type 4 engine: offers around $SOLD

as i said, i'd rather shift it as a job lot. so if you're after parts (other than the wheels and engine) feel free to ask questions and make offers, but i wont sell parts for about 2 weeks (ish).

pictures to follow...

thanks

kai

(edit) for any offers or questions please contact me by replying here or through u2u. thanks

[ Edited on 18-5-2006 by Kai.A. ]

[ Edited on 22-5-2006 by Kai.A. ]

[ Edited on 24-6-2006 by Kai.A. ]

[ Edited on 24-6-2006 by Kai.A. ]

[ Edited on 3-7-2006 by Kai.A. ]

[ Edited on 10-7-2006 by Kai.A. ]

here's a pic of the car as it sits now.

the doors

the car again

wheels

tyres

last pic for now...

if you want pics of any specific parts let me know and i'll get them up here as soon as i can.

Interested in the brake setup if you part out.

ok, you're first in line if i can't sell the whole thing.

kai

Hi Kai i am interested in the type 4 is it complete? give me a ring Im in Avalon tomorrow afternoon at about 5 and could drop around. Mitchell 0422 802 199

[ Edited on 18-5-2006 by waltermitty ]

you have u2u...

kai

the type 4 motor is sold!

kai

Thanks mate. A pleasure. did you make the rugby?
Guys heads up I checked this out today and its a great project he is talking it down.
Its almost rust free, straight as a die and has heaps of spares , heaps.
He is selling at a loss so as to keep it all together parted out it would be worth more.
This will make a nice square for someone.
Mitchell
P.S. the hand polished mags with brand new yokos are sensational, great wheels and tyres very cheap. M

[ Edited on 19-5-2006 by waltermitty ]

thanks for the comments mitchell. i managed to catch about 10 min. of the game in the end, it was packed in the pub!

back to the car....

i had a big tidy up in the garage on friday! i chucked the new doors, the wings and the bonnet back on, it looks a lot more likle a car now!

the seals i have are brand new!
two door seals
a bonnet seal
windscreen seal (the one without the chrome strip in it.
seals for the tail lights
and possibly one or two more i havn't found yet.

the car also has a very tidy carpet (rather dusty right now but will clean up like new).
and an original rear seat.
the front seats are out of a mazda 323 i think.

the b-pillars have the factory cut-outs in so that pop-out windows can be fitted...

anyway, here's a couple more photos...

.

this door really is absolutely rust free!!!!!

last pic. for now.

hey very interested in the 1600 with the fuel injection setup. wot type of microtech is it? mt4, mt8 mtx8?????

would u be able to post a pic up?

will make u an offer

alex

i'll get the info and a pic or two for you asap.

as yet i don't want to part it out, i'm still hopeful to sell the whole lot so the resto can be finished....

kai

any luck with the pics? is the injection setup twin throttle bodies?

sorry, i've not had a chance to get the pics yet.

the motor is a standard late model type 3 motor.
the only change is the microtec computer...

hope this helps.

kai

any luck with finding out wot michrotech it has?

I think the motor is a standard TLE type 3 fuel injected system run by a microtec. ( or wolf or something Kai said)
He may correct me I have asked him to find out also.
I know he is flat out ATM.
As for this project this is one solid square, as rust free as you can get and would make a great project.
Mitchell

i would love to see some more pics, if you could email to dub_rat@hotmail.com that would be great

I would like to put my hand up for the door seals and the bonnet seal if they are in as new nick. Please let me know what other seals you have as I am in need of a few for my '68 notch project!
Cheers!
Toby :thumb

hi guys, sorry i've taken so long to reply.

as mitchell said, i've been flat out....

ok.

i've got a pic of the engine, and one of the microtec.
this should clear everything up.

dubrat- what pictures would you like me to send you.
please reply here or u2u me with what you need and i'll get onto it asap.

as for everyone else.... if dubrat doesn't take the whole project i will part it out, it's been over 2 weeks and i've got to get rid of this thing fairly soon.

so, if your after parts just wait a few more days...

kai

the microtec...

Kai I am still keen on the Micro tech , let me know when you know which way you go. M.

Microtech Engine Management Systems
Microtech MT4/LT4 Engine Management Systems

The LT4 is a FUEL ONLY ecu and will not control ignition. It is designed for use on engines with stand alone ignition systems or as a piggy back system that just controls fuel delivery on cars that still retain the stock fuel/ignition ECU but with the stock injector outputs disabled."

should know in the next few days if it's gonna go as one thing or be parted out.

i'll e-mail those pics to you sometime soon mitchell... i've still got to find the second badge....

kai

Interested in your wheels, what size are they?

15 inch

not sure on the width, 5.5?? the tyres are 185s...

kai

I'm keen for several parts for my project - U2U sent!

Did this sell?

it's still here.

i've not sold it for parts, still got one or two possible interested parties, who may take the whole lot.

unfortunately the delay has been me! i need to find more time in the day sometimes...

kai

That's cool I know how it gets at times!
Can I put 2nd dibs on Microtec and wheels/tyres?
I sent U2U but just making it public.
Also first dibs on seats, injection parts, muffler system with heaters (stock?) if u have them as well as boot, bonnet, engine lid & door seals.
Bits will go to a good home (my 68 notch) but I understand your interest in seeing it finished as a complete car.
Good luck and if u decide to sell parts please let me know.
Cheers! Toby :thumb

if your interested in the wheels and tyres, i'm happy to sell them seperately to the vehicle.

when i bought them they had just come off a 65 (i think) notch.

kai

Still hovering for the brake setup mate.

Please let me know if you end up parting out.

Keen on the wheels & tyres pending inspection & agreed price.
Please U2U me when u r available so I can come over and take a look. Thanks!

the wheels are sold.

the rest of the car is now going to be parted out.

if you want something make me an offer!

ruckus, your first on the brakes. you have u2u.

mitchell, i think you're first on the microtec... u2u

cheers

kai

Do you still have the original rear drum brakes for it?

no, i think they went to the big vw parts bin in the sky...

kai

would you sell the passenger side front wing?
Also what condition is the interior in?
And how good is the drivers side rear wing?
thanks

the interior has mazda 323(or similar) front seats, and original rear and good carpets and door trims etc.

all parts are for sale, i'll pull the wings back off and get a couple of photo's for ya...

cheers

kai

cheers,also looking for the rear wrap around reflectors

i'll deffo get those photos tomorrow and i do have a pair of the wrap around reflectors too.

kai

Hey Kai I love the new wheels! Here's a pic, although I still need to raise the rear a bit.
How u travelling with the other bits we talked about? Please email or u2u.

Cheers, T

bump.

surely someone is looking for a good cheap starting point for their next project! i'll let it go for $1000!

i may even be able to help with transporting it locally...

anyone???

kai

pics for fireball xl5

the front passenger side wing is very good! had the rust repeired already.
the drivers side rear still needs a bit of work along the bottom and a little at the top where the wing bolts to the body just below the windows...
the reflectors are just the chrome peice, i've binned the old reflectors that were in them.... i was in the process of making some custom bullet indicators out of them. they are in ok condition, but not perfect...

sorry for the delay, i took the pics and then promptly forgot to upload them.

kai

[ Edited on 3-7-2006 by Kai.A. ]

2 more pics

u2u sent

u2u also sent

thanks for that,
u2u sent

replies sent.

kai

i'm going to start a new thread on sunday with a list of all parts available and some more pics....

until then here's a list of bits which are now sold:

engine
microtec ecu
door seals and bonnet seal
pass. side front wing
rear wrap around reflectors.

i feel like i'm missing something off the list..... ah well.

there'll be a new thread on sunday anyway.

kai

did you get my u2u?

ruckus, you have u2u....

kai:thumb

Very interested in the rear disc brakes. Can you u2u me with a price if you're parting them please.

Sorry, on second dibs after ruckus. Cheers.

[ Edited on 7-7-2006 by sinecure ]

the car is now gone, i have some parts remaining, brakes, doors, speedo, tailgate, etc, which i will take photos of and post in a new thread tomorrow(monday).

cheers

kai