Aussieveedubbers · Tech Talk

modifying rocker covers

https://forums.aussieveedubbers.com/threads/53866/modifying-rocker-covers

Stanley · 1 Jul 2006, 7:03 pm

Has anybody modified stock rocker covers by putting breather tubes in? TIA

Craig Torrens · 1 Jul 2006, 7:25 pm

Yep, easy job................what did you want to know?

Stanley · 1 Jul 2006, 7:27 pm

location and size...thanks Craig

Craig Torrens · 1 Jul 2006, 8:01 pm

back top corner of the rocker cover (cyclinder 1 and 3)

Craig Torrens · 1 Jul 2006, 8:03 pm

pipe is the same size as the breather tube on the oil filler, approx 13mm ID.

Stanley · 1 Jul 2006, 8:13 pm

Thanks Craig...luckily thats exactly where I drilled my pilot holes...They just looked close to the rocker gear.
Thanks again

bond · 1 Jul 2006, 9:36 pm

it wouldnt matter which side you drilled it - so long as it was the same for both covers.....?

nick

Craig Torrens · 1 Jul 2006, 9:42 pm

not the same for both covers.........opposite/ mirror image.

bond · 1 Jul 2006, 9:47 pm

ill just go sit outside by myself for a minute..... lol

nick

DallanMulley · 2 Jul 2006, 12:21 pm

I've a set of ally covers with breathers in. Yours for $50

[ Edited on 2-7-2006 by DallanMulley ]