I am making a full roll cage for my Dragon 1960 bug , has any one any isde photos to share ?
cheers seagull
seagull ·
Aussieveedubbers · Non-VW Engine Conversions
Making a full roll cage for the Dragon
https://forums.aussieveedubbers.com/threads/54603/making-a-full-roll-cage-for-the-dragon
kevo ·
my mate bought one for his mkII escort this week, the bolt in ones are seriously cheaper than the welded type, i think his cost $1100 made to racing standards, he's in perth too mate ill find the place for ya 2mora
gull ·
Tony flood I think ????
hellbugged ·
:thumb
gull ·
thanks , were did you get it
hellbugged ·
it's a BOND roll bar-they in Sydney and still make em.
hey Neil, bergs are doing the final testing on a five speed conversion for the 2L kombi box, that also allows fittment to a type 1👍
[ Edited on 24-7-06 by dumone ]
hey Neil, bergs are doing the final testing on a five speed conversion for the 2L kombi box, that also allows fittment to a type 1👍
[ Edited on 24-7-06 by dumone ]
gull ·
Ok cheers
I am going to be making up to pans for the dragon
1x kombi 2ltr box
1 x G50 box
I will be pulling the body off at a later date for the G50 box , as I am building a off road racing truck with a turbio VG30 T motor , so many jobs on the go .
But thats me getting it done !
\My WRX arrived as well so thats in the shed now .I going to be throwing in the RS turbo motor I have in the shed into the bug asits out of the front cut , cost $216.66 all up
who has a Fast air cooled motor that cost that hey .
getting it done , seagull Neil
Anthony were is my tie down strap !
get your ass over with your brakes !~
I am going to be making up to pans for the dragon
1x kombi 2ltr box
1 x G50 box
I will be pulling the body off at a later date for the G50 box , as I am building a off road racing truck with a turbio VG30 T motor , so many jobs on the go .
But thats me getting it done !
\My WRX arrived as well so thats in the shed now .I going to be throwing in the RS turbo motor I have in the shed into the bug asits out of the front cut , cost $216.66 all up
who has a Fast air cooled motor that cost that hey .
getting it done , seagull Neil
Anthony were is my tie down strap !
get your ass over with your brakes !~
71superbug ·
neil richard is sending the front brakes to you as the calipers need some machining i believe,
recieved my torsion bars and bushings .etc all today
also neil, can you give me a call when u get the chance,
0430 062 233
the PO-LICE decided to yellow sticker my ute and it would not be worth saving so i am thinking i might have to put the subie conversion on hold and register the vw with a 1600 or something cos i have no transport now.
would like to talk to you regarding engineering the bug with the 1600 but all the cross drilled brakes and racing suspension .etc
would it cost much? just give me a call. 🙂
thanks in advance, anthony
Anthony
recieved my torsion bars and bushings .etc all today
also neil, can you give me a call when u get the chance,
0430 062 233
the PO-LICE decided to yellow sticker my ute and it would not be worth saving so i am thinking i might have to put the subie conversion on hold and register the vw with a 1600 or something cos i have no transport now.
would like to talk to you regarding engineering the bug with the 1600 but all the cross drilled brakes and racing suspension .etc
would it cost much? just give me a call. 🙂
thanks in advance, anthony
Anthony
gull ·
The last one cost $660.00
I called you as well
I called you as well
71superbug ·
neil, i also know someone whos brother makes cams approved cages here in perth.
i got quoted 1,000 for a half cage (these are fully approved cages remember)
and weld in or bolt in was pretty much the same price.
Anthony
i got quoted 1,000 for a half cage (these are fully approved cages remember)
and weld in or bolt in was pretty much the same price.
Anthony
gull ·
Thats cool , I can make my own
seagull ·
cuting up the Dragon