WTD.(Bris) IRS arms & Axles · Aussieveedubbers

SirDelton · 24 Sep 2006, 10:46 pm

Hi Guy/Girls..

The Kitcar I'm doing up based on a T3 isn't an IRS, so I'm looking at buying the brackets from Classic to weld onto my rear end..

So I require the bottom arms & a set of axles to suit..

Plus anything else that maybe required to do this mod.
Rear end will be running Disc Brakes when completed.

Cheers
Darren..

vw2b · 25 Sep 2006, 10:32 am

What are brackets from classic ?

VWCOOL · 25 Sep 2006, 11:19 am

The inner pivot points required for the 'IRS' suspension arms. You can buy them and weld them to a non-IRS chassis

SirDelton · 25 Sep 2006, 5:22 pm

VWCOOL wrote:The inner pivot points required for the 'IRS' suspension arms. You can buy them and weld them to a non-IRS chassis

Correct..

Well I believe that is the case.

Somebody must have a set somewhere?
I know some of you guys have used a Porsche 944 to do this.

Cheers
SD

rocknrob · 25 Sep 2006, 8:22 pm

Was reading a thread on this very thing and apparently COR makes them

SirDelton · 25 Sep 2006, 9:45 pm

rocknrob wrote:Was reading a thread on this very thing and apparently COR makes them

I was hopping to do this on the cheap..
This project is going to cost me more & more everytime I turn around.. :cry The STD arms fully welded should be WAY better then what I have..

dangerous · 26 Sep 2006, 8:56 am

If you can find a whole type 3 rear end, they are a bolt in...no welding.
Type 1 will need to be welded.

SirDelton · 26 Sep 2006, 10:29 pm

dangerous wrote:If you can find a whole type 3 rear end, they are a bolt in...no welding.
Type 1 will need to be welded.

If anybody has a complete T3 IRS rear end please U2U me.

I'm still looking..

Thanks

Midlife crisis · 26 Sep 2006, 11:18 pm

I have sent you a U2u about a complete IRS rear.

Marc

MikeM · 26 Sep 2006, 11:41 pm

What sort of kit car you building?

I have an IRS type 3 rear going cheap. Doesn't have trailing arms, torsion bars or spring plates.

Case of Bundy and Coke and it's yours. Will post a photo tommorow.

[ Edited on 26 September 2006 by MikeM ]

SirDelton · 27 Sep 2006, 9:03 am

MikeM wrote:What sort of kit car you building?

[ Edited on 26 September 2006 by MikeM ]

this is the one & only car built by Swanston & Pariss Industries at Carina QLD around 1985.
It is called a Paragon SP1.