Aussieveedubbers · Buying, Selling & Swapping Parts

inlet manifolds

https://forums.aussieveedubbers.com/threads/57214/inlet-manifolds

ciarog9 · 8 Oct 2006, 2:43 pm

pair of manifolds to suit twin port head,not sure what carburettors they take,possibly weber 28/36,manifold stud spacings are 85mmx53mm,may suit T3 as they are short manifolds.
$40 plus postage,I'm on the Central Coast NSW.

VW-MAD · 9 Oct 2006, 9:31 pm

hi do you have any pic's cheers mandy

ciarog9 · 10 Oct 2006, 6:36 pm

here is a couple of pictures

ciarog9 · 10 Oct 2006, 6:38 pm

sorry tried to post a couple of pictures,but i cant get them on.any tips on how to post photos anyone.

LUFTMEISTER · 10 Oct 2006, 10:56 pm

go to microsoft paint.
find your picture
go to resize.
reduce to around 50kb
click save as.
then post on site.
good luck 😉

Gracey · 11 Oct 2006, 6:03 pm

Or go to photobucket, set up an account, then simply hyperlink your pics.

http://i71.photobucket.com/

ciarog9 · 11 Oct 2006, 7:54 pm

ciarog9 · 12 Oct 2006, 6:49 pm

thanks to DUBB61 and Gracey for your help, much appreciated.

Gracey · 13 Oct 2006, 1:36 pm

No Worries,

my guess is they suit DCNF Webers.

ctefeh · 13 Oct 2006, 5:26 pm

ciarog9,
What's the length by width of the spacing between the 4 carb mount studs? Post it and I can tell you whether Zenith or Bugsprays can be eliminated.

Ctefeh

ciarog9 · 13 Oct 2006, 8:44 pm

the spacing is 85mmx53mm

ctefeh · 19 Oct 2006, 10:44 pm

Sorry for the late reply.

My 2110 Bugspray measures 48 x 83 4 bolt pattern.

Ctefeh

Joel · 20 Oct 2006, 5:47 pm

i just checked and gracey's right there for DCNF webers
mine were that measurement from the center of each stud

-Joel