Aussieveedubbers · Tech Talk

valve adjusters/tappets

https://forums.aussieveedubbers.com/threads/59772/valve-adjusterstappets

76camper · 21 Jan 2007, 1:15 pm

hey guyz,
does anyone know if the valve adjusters on my 1.8L kombi motor are hardened? Can i clean up the contact point on lathe or will it remove the hardened layer and then wear really quickly?

koolkarmakombi · 21 Jan 2007, 2:46 pm

yes, yes and maybe. They are hardened. You can clean them up and you may go through the hardening. You may find you need to grind them as they are a similar hardness to the cutting tool. You can buy new ones or touch them up with something like stellite which is really hard.

http://en.wikipedia.org/wiki/Stellite

luck,

kkk

toplessbug · 21 Jan 2007, 3:28 pm

if they are worn that much that you notice it toss em and buy new ones they are cheap ,dont try and dress them they are stuffed ,be reasonable, they are prolly 30 yrs old and worn out:beer:beer:beer

76camper · 21 Jan 2007, 4:25 pm

had a spare set and just cleaned them up, material seemed to come of fairly easily... mayb i wasnt the first to have a go at them... will look into a new set :-)